Weihua Cranes: 十二月 2022

2022年12月25日星期日

180t Ladle Crane Deliver to Kazakhstan

Recently, 7 large-capacity cranes were shipping to Kazakhstan serving for a steel group project. The cranes including a 180-ton ladle bridge crane, a 90+90-ton semi-gantry crane, and a 100-ton bridge crane.

These cranes for metallurgy industry are designed with the European FEM standard. With modular design and modern computer technology, these cranes are fully automated, intelligent, suitable for the production site with a large temperature difference.

180-ton Ladle Crane Technical Features:

1. This ladle crane adopts a new rigid bridge structure with four girders, four rails and double trolleys, and the working level reaches A8;

2. The crane-weight is reduced by 10%, the height is reduced by 25%, and the width is reduced by 25%; the crane can be applied to the ambient temperature of -40°C to +60°C;

3. The new type of festoon cable power supply device that is resistant to high temperature radiation can operate reliably under the condition of high temperature radiation.

Technical Features of 90+90 ton Semi-gantry Crane:

1. This semi-gantry crane is a dedicated material charging crane for steel plant. The lifting capacity of the crane is 90+90t, the lifting height is 24m, and the working level is A8;

2. The crane is a latest design for the problems of limited production space, high risk factor of tilt-pulling and hoisting during feeding, and excessive wire rope tilt-pulling angle;

3. It adopts the structure of 3 girders and 4 rails, and 2 independent lifting mechanisms are designed on each trolley, equipped with a special four-point gantry hook spreader, and the two lifting mechanisms can realize the function of hopper dumping and feeding through their independent actions;

4. Finite element optimization check calculation of the overall structure, simulate the actual operating conditions of the crane, and reduce the dead weight and the wheel pressure by 10%;

https://www.weihuabridgecrane.com/news/180t-Ladle-Crane-for-Kazakhstan.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

350t Bridge Crane Shipping to Steel Plant

Weihua made a 350t bridge crane for steel plant was shipping to the project site. The image shows the 9 large transport vehicles loaded with huge overhead cranes and accessories drove out of Weihua Intelligent Industrial Park in a mighty manner to the client's site.

The 350t casting bridge crane in this project is designed with a span of 37 meters with a 4-beam 6-track double-trolley structure. The main hoisting reducer is integrated with the frame. The manufacturing process of overall annealing and overall processing ensures the installation accuracy of gears, bearings, motors, brakes, etc. making the crane run more stably.

At present, the crane of this project have been sent to the customer's site one after another. The high-quality products and services will help the customer's project construction, and will once again demonstrate the outstanding strength of Weihua products in the large-tonnage metallurgical crane market.

https://www.weihuabridgecrane.com/news/350t-Bridge-Crane-Shipping-to-Steel-Plant.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

2022年12月21日星期三

500 Tons Ladle Crane Delivery

Weihua provides a capacity 500 tons heavy duty metallurgical ladle crane for a steel company. The crane is loaded on 4 trucks and shipping to the customer's site.

500 Tons Ladle Crane Delivery

This bridge crane is a capacity 500 tons 4-girder 6-Rail Metallurgical Crane independently developed by Weihua Crane. This time, only the main structure of this crane was delivered to a large steel company with steel production capacity reaching 6.5 million tons.

Features
It adopts strict and high-standard full-process control, overall processing of large structural parts, overall annealing treatment of the main trolley frame and the heavy-duty gearbox, and the overall assembly, thus the equipment stability is higher.

The electrical system uses advanced energy feedback technology, and the power generated by heavy machine loads is reused, which has greatly improved the energy utilization rate of equipment.

https://www.weihuabridgecrane.com/news/500-Tons-Ladle-Crane-Delivery.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Erection of Weihua Port Cranes at Jinhua Port

Jinhua Port, as the core node of Jinhua City to link up with the Belt and Road initiative, has a huge cargo throughput. Among them, the comprehensive modern port - Luoyang Operation Area will undertake the water cargo handling operations in Jinhua City.

Erection of Weihua Port Cranes at Jinhua Port

After the successful delivery of the project of Weihua port cranes to customers, it will promote the accelerated construction of Jinhua Port Luoyang Operation Area, and contribute to alleviating the pressure of cargo transportation and promoting high-quality economic development in Jinhua City.

Products of the project include 3 portal cranes and 1 rail mounted container gantry crane.

https://www.weihuacraneglobal.com/case/Erection-of-Weihua-Port-Cranes-at-Jinhua-Port.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

2022年12月12日星期一

Bridge Crane Installation in Malaysia Steel Work

Bridge Cranes Installation in Malaysia Steel Work

Equipment: Bridge Cranes

Use: Steel Works

Manufacturer: Weihua Group

For: Joint Steel Project

In: Kuantan, Malaysia

https://www.weihuabridgecrane.com/case/Bridge-Crane-Installation-in-Malaysia-Steel-Work.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

5 Sets 320t Ladle Crane for Metallurgical Production

Recently, Weihua made 5 sets 320t ladle cranes for a project in Hebei Province. With its super performance, Weihua products help to improve the efficiency of the customer's workshop operation, becoming another beautiful scene in the list of large tonnage metallurgy crane projects.

5 sets 320t ladle cranes

The project includes 3 sets 320/80/15t-25m ladle cranes and 2 sets 320/80/15t-31m ladle cranes, which have been successfully put into metallurgical production in the customer's workshop.

320t-ladle-crane-for-metallurgical-production

The 5 ladle cranes all adopt a 4-girder and 4-rail layout, and the main reducer has a stable structure. The crane wheels and the trolley wheels are interchanged, and the trolley is four-wheel drive, which is safe and stable, ensuring full load and safe operation for a long time. In addition, the electrical design has the following characteristics:

★ The system has redundant control function, which enables fast switching of single mechanism failure and ensures safe operation in 365 days;

★ The system has a variety of safety warning functions, such as smoke detection warning, safe area operation warning, remote wireless intercom, etc;

★ The system is equipped with a life detection system, which can monitor the reducer vibration, motor temperature, various electrical equipment and other life and analyze the fault records.https://www.weihuacraneglobal.com/case/5-Sets-320t-Ladle-Crane-for-Metallurgical-Production.htmlEmail: weihua@craneweihua.comWhatsApp: +86 15093392066