我的博客列表

2021年6月24日星期四

Bucket Wheel Stacking Reclaiming Machine

 1. Cantilever Bucket-Wheel Stacking-Reclaiming Machine

 

bucket-wheel-reclaimer
Bucket-Wheel Stacking-Reclaiming Machine

 

This machine is a high-efficient, continuous and large-scale material handling equipment for bulk materials handling. Cantilever type one can be used at the coal and ore storage yards in the fields of electricity, metallurgy, coal, building, chemical, etc.

 

coal-bucket-wheel-stacker-reclaimer

 

The cantilever type bucket-wheel stacking-reclaiming machine has the arm range of 20-60m and stacking capacity of 100-10,000t/h, which is widely applied to the strip materials yard.

 

Stacking and reclaiming:

1. Stacking: coal → ground belt conveyor → auxiliary tail car → main tail car → main tail car head hopper → boom belt conveyor guide trough → boom belt conveyor → coal storage yard.

2. Reclaiming: coal→ bucket wheel mechanism→ boom belt conveyor→ center drop hopper→ ground belt conveyor.

 

bucket-wheel-stacker-reclaimer

 

Features:

1. Multiple operation modes

Single action mode, manual mode, automatic mode and local mode can be switched freely according to different operation requirements without any interference effect;

2. Automatic controllable operation, real-time data feedback

The PLC main control device realizes the full automatic control of the stacker and reclaimer operation, collects the pile shape data through the instrument, and feeds the material storage condition in real time;

3. Three-dimensional anti-collision, accurate and reliable positioning

The three-dimensional anti-collision system is based on high-reliability and high-precision positioning system detection and attitude detection, and realizes anti-collision between equipment and material piles, equipment and equipment, equipment and devices along the track;

 

Thermoelectric-bucket-wheel-stacker-reclaimer

 

4. Timely warning, double security protection

Mechanical and inductive limit switches are set at each operating mechanism, and warning warnings and limit parking points are set in the program monitoring to establish double safety protection;

5. Two-line intelligent lubrication, reducing labor intensity

The whole equipment adopts electric centralized lubrication, which greatly reduces the labor intensity; the two-line intelligent centralized lubrication system is adopted, and the lubrication effects of the front and rear lines do not affect each other. The intelligent monitoring system can indicate the fault point and reduce the manual inspection intensity;

6. Versatile and cost-effective

It adopts the full-function double-tailed car layout to realize easy material stacking and reclaim function, multi-functional and cost-effective.

 

2. Gantry Bucket-Wheel Stacking Reclaiming Machine

 

gantry-material-stacker

 

This machine is a large bulk material handling equipment used for continuously working in thermal power plants, industrial and mining enterprises and the bulk materials storage yards in the port.

 

Weihua gantry bucket-wheel stacking reclaiming machine has the rail length of 20-60m, reclaiming capacity of 150-2500t/h and stacking capacity of 300-3,000t/h.


https://www.weihuagantrycrane.com/product/Bucket-Wheel-Stacking-Reclaiming-Machine.html

Email: weihua@craneweiua.com

WhatsApp: +86 15093392066

2021年6月21日星期一

Bridge Type Chain Bucket Unloader

 The Bridge Type Chain Bucket Unloader is with a special chain bucket unloader for the unloading of particle materials from trucks. The bulk materials can be coal, gypsum, shale, iron ore, etc.

 

chain-bucket-Brige-type-unloader

 

Bulk Material Size:

1. Coal and gypsum: ≤300mm, ≤100mm accounted for more than 85%, moisture content ≤13%

2. Shale: ≤150mm, ≤80 accounts for more than 85%

3. Iron ore: ≤80mm, ≤50mm accounted for more than 85%

 

chain-bucket-unloader
Bridge Type Chain Bucket Unloader

 

Features of Bridge Type Chain Bucket Unloader:

1. The unloading capacity of this unloader can reach 500t/h, and it can unload materils from 5 sections of 60 tons trucks per hour.

2. The unloader adopts upper and lower double girder structure and mobile tipping bucket mechanism, which makes the unloder able to work on multiple transportation lines.

3. The chain bucket is designed with T-shaped mechanism, which makes it able to unload the material in forward and reverse directions, improving the unloading efficiency.

4. Traveling reducer is designed with small size, large output torque and long service life.

5. The blanking device of the belt conveyor adopts a sealed telescopic slip tube to reduce dust during the belt blanking process.

6. It is equipped with overload limiter, lifting height limiter, trolley buffer, running stroke limiter and safety shield, etc., with excellent safety performance.

 

unloader-chain-bucket

 

Weihua bulk material handling equipment can be conveying equipment and port loading/unloading equipment, which serves in the field of mining, coal, water conservancy and hydropower, transportation, ports, petrochemicals, cement, metallurgy, thermal power, municipal engineering, construction sand, etc. Various product forms (such as gantry type and bridge type) can be designed according to customer requirements.

 


https://www.weihuagantrycrane.com/product/Bridge-Type-Chain-Bucket-Unloader.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

 

Weihua Overhead Crane Installation in Mexico

 Weihua made 17 sets overhead cranes for a Mexico machine manufacturing company. The products including 11 models single girder overhead cranes and double girder overhead cranes. After shipping, Weihua sent the installation team to Mexico for crane installation task.

 

The installation team members who went to the project site have all been vaccinated in China, and they will strictly comply with the local epidemic prevention and control requirements. Our installation team will do their best to complete the delivery and installation job to guarantee the project successful running.

 

weihua-crane-loading-truck-to-mexico

 

overhead-crane-shipping-to-mexico

 

weihua-installation-team

 

weihua-installation-team-in-mexico

 

weihua-crane-installation-team

https://www.weihuacraneglobal.com/news/Weihua-Overhead-Crane-Installation-in-Mexico.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

2021年6月15日星期二

Gantry Crane for Beam Handling / China leading crane manufacturer

 This gantry crane is for the hoisting or moving of railway/highway concrete beams or bridges. There are 2 kinds gantry crane for beam handling: beam hoisting crane and beam moving machine.

 

450t-high-speed-railway-gantry-crane
Gantry crane for beam hoisting

 

For Beam Hoisting:

Gantry crane for beam hoisting is composed of main beam, supporting legs, crane traveling mechanism, hoisting mechanism, electric control, hydraulic system, cabin, railing, ladder and walkway, etc. And there are 2 types of crane traveling: Tire traveling and rail traveling.

 

The crane traveling, steering and hoisting of tire type gantry crane are all driven by hydraulic, which can realize traveling straight, oblique and horizontal, etc. Features of tire type gantry crane: Strong adaptability, high working efficiency, small footprint, need no rails, etc. Thus it is widely used for high speed railway construction for beam lifting, moving and loading.

 

Rail mounted gantry crane for beam hoisting is usually for lifting railway beams within 1,000t, which is driven by generating units on it. This crane travels on rails with 2 directions: straight and horizontal.

 

Features of Rail Type Gantry Crane for Beam Hoisting:

1. With special spreader;

2. Two cranes, two trolley, and Max. lifting height: 30m;

3. The concrete beam is parallel to crane rail;

4. Max. wheel load is 22t while lifting 900t beam;

5. Carry out 90°steering on straight and horizontal rails;

6. 4 points hoisting, 3 points balancing to ensure wire rope balancing and accurate landing;

7. Trolley adopts hydraulic push pole to realize different beam hoisting to save cost;

8. Total 4 winch trolley, which realizes drive separately, 2-2 drive or 4 simultaneous drive.

 

450t-high-speed-railway-gantry-crane

 

For Beam Moving:

Gantry crane for beam moving is mainly used for passenger railroad construction for concrete beam moving. Users can use 2 gantry cranes (500t, 450t) or 1 gantry crane (1,000t, 900t) with 2 lifting points to handle beams. There are 2 type for crane traveling: tire type and rail type.

 

The crane traveling, steering and hoisting of tire type gantry crane are all driven by hydraulic, which can realize traveling straight, oblique and horizontal, etc. Features of tire type gantry crane: Strong adaptability, high working efficiency, small footprint, need no rails, etc. Thus it is widely used for high speed railway construction for beam lifting, moving and loading.

 

Rail mounted gantry crane for beam hoisting is usually for lifting railway beams within 1,000t, which is driven by generating units on it. This crane travels on rails with 2 directions: straight and horizontal.

 

Features of Rail Type Gantry Crane for Beam Moving:

1. With special spreader;

2. Two cranes, two trolley, and Max. lifting height: 12m;

3. The concrete beam is parallel to crane rail;

4. Max. wheel load is 22t while lifting 900t beam;

5. Carry out 90°steering on straight and horizontal rails;

6. 4 points hoisting, 3 points balancing to ensure wire rope balancing and accurate landing;

7. Trolley adopts hydraulic push pole to realize different beam hoisting to save cost;

8. Total 4 winch trolley, which realizes drive separately, 2-2 drive or 4 simultaneous drive.

 

900t-gantry-crane


https://www.weihuagantrycrane.com/product/Gantry-Crane-for-Beam-Handling.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066


Dam Top Gantry Crane / China Leading Crane Manufacturer

 Dam top gantry crane is employed to lift floodgate, Hydro-generating unit and trash rack on dams. The working area is a line or belt area along its running rails. The structure is plate girder or box girder. The lifting mechanism, gear box which hoist and crane traveling mechanism are driven by motors. There is a closed operation room on main beams. The slings is a hoisting beam powered by flexible cable device. The foot is protected by Buffer device and Windproof rail clipping device.

 

2500kn-dam-top-crane
Dam top gantry crane

 

There are two kinds of dam top gantry crane: 1. Single direction: The lifting mechanism (slings/hook) is fixed on trolley and only travel along the rails direction on main beams, thus it can only lift one side floodgate/trash rack. 2. Double directions: The lifting mechanism on trolley can move vertically against the main beam rails direction, thus it can be used to lift 2 sides’ floodgates/trash racks of upstream and downstream.

 

dam-top-gantry-crane

 

dam-top-gantry-crane

 

dam-top-gantry-crane

 

dam-top-gantry-crane

 

wooden-case-loading

 

gantry-crane-dam-top

 

power-plant-gantry-crane-on-dam


https://www.weihuagantrycrane.com/product/Dam-Top-Gantry-Crane.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066


2021年6月8日星期二

Subway Construction Crane / China leading crane manufacturer

With the expansion of cities and growthing of traffics, many big cities are suffering from Urban Disease - serious traffic pressure. To solve this problem, people start to build subways. It is comfortable, fast and convenient, and becoming an important way of travel in urban cities.

 

subway-construction-gantry-crane
Subway Construction Crane

 

For the subway construction, the construction equipment, especially the cranes and shield excavators, are becoming more and more important. As a leading crane manufacturer, Weihua has rich experience and many project case of subway construction gantry crane.

 

subway-construction-gantry-crane

 

The main role of subway construction crane is for slag handling during subway tunnel construction. This kind cranes are used for lifting the dregs/slag excavated by shield excavator to the ground or lifting other site material.

 

subway-construction-crane

 

Features of Subway Construction Crane:

1. Variable span, improve crane adaptability. With the span-changed function of Min. step-length 100mm, this gantry crane is suitable for various working conditions.

2. Cantilever can be detachable, more flexible. The cantilever is detachable, also can preserve the cantilever interface which will be flexible for different working conditions.

3. Travels fast, high work level, high efficiency;

4. Long lifting distance;

5. Tilting spreader with automatically tipping. The subway construction crane is equipped special spreader and realize the interchange of dregs bucket and the hook.

6. Lightning protection system AND wind speed detection warning system.

7. Overturn hook realizes overturning the dregs at any position in the air. Overturning dregs system is controlled by hydraulic which makes it more stable.

8. The trolley is rotatable, which can transport slags from the front and side.

 

40t-slag-handling-gantry-crane

 

40t-slag-lifting-crane-metro

 

wooden-case-loading

 

metro-line-construction-crane


https://www.weihuagantrycrane.com/product/Subway-Construction-Crane-for-Dregs-Lifting.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Gantry Crane for Tunnel Boring Machine / China Leading Crane Manufacturer

 Tunnel boring machine (TBM) with shield can lay shields (tunnel plates) during the boring of tunnel, which is different from the open style tunnel boring machine.

 

440t-gantry-crane-tunnel-boring-machine

 

Gantry crane for tunnel boring machine with shield is mainly employed to lift the cutter and shield plate of tunnel boring machine. The lifting mechanism of this gantry crane is rotatable for different digging direction. It is designed with safety instructions and overload protection device system. PLC frequency conversion adjustment system makes it easy to control every mechanism.

 

440t-gantry-crane-tunnel-machine
Gantry crane for tunnel boring machine

 

Features of Tunnel Boring Machine Gantry Crane:

1. Spreader is with 360° rotation which is flexible for installation of cutter from different angles;

2. Double trolley mechanism is applied for lifting cutter by double trolley or lifting duct piece by single trolley;

 

gantry-crane-tunnel-boring-machine

 

Working Environment:

1. 3 phase A.C. 50HZ 380V

2. Working temperature: -20 ~ +45 degrees and the Max relative humidity: 95%( with condensation);

3. Max. wind speed: 20m/s;

4. Working leave: A3, A4;

5. Special requirements are available.

 

gantry-crane-tunnel-machine

 

wooden-case-loading

 

gantry-crane-drawing

 

tunnel-machine-crane-drawing

 

tunnel-machine-gantry-crane-drawing

https://www.weihuagantrycrane.com/product/Gantry-Crane-for-Tunnel-Boring-Machine.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066