Manual Type Single Girder Overhead Crane

Product Name: Manual Single Girder Overhead Crane 

Lifting Capacity: 1-10t

Lifting Height: 3-10m

Work Duty: A1-A3

This manual type single girder overhead crane is a small-sized light weight crane for the assembly and maintenance in workshops without power supply or power off situations. Its working environment temperature should not be lower than ﹣20℃.

Manual Single Girder Overhead Crane 

This manual single girder overhead crane is constituted by main girder, end girders, drive sprocket, gears, manual monorail trolley and hoist.

Features of Manual Single Girder Overhead Crane:

1. Compact structures, light weight;

2. Advanced performance, lifting smoothly and accurately;

3. Safety and reliable operation;

4. Less noise, easy operate;

5. Convenient maintain, interchangeable components. 

http://www.weihuacraneglobal.com/product/Manual-Single-Girder-Overhead-Crane.html

Email: weihua@craneweihua.com

Chinese Standard Single Girder Overhead Crane

Product Name: Single Girder Gantry Crane with Chinese Standard

Lifting Weight: Max. 20t

Lifting Height: 6, 9, 12m or other special height

Span: 7.5~31.5m or other special span

Chinese standard single girder overhead crane is a kind of crane travelling along two parallel rails and lifting mechanisms travel along horizontal main girder. Chinese standard single girder overhead crane is composed of main girder, end girders, traveling mechanisms, lifting mechanism (hoist) and electrical components. This crane is usually used in long distance workshops and runs along the rails on both sidewalls.  

Single Girder Gantry Crane with Chinese Standard

This crane is a single girder type crane with traditional steel girder or box-typed girder. The lifting capacity is usually less than 20 tons. This type crane can be used in steel plants, hydro-power stations, warehouses and workshops etc.

http://www.weihuacraneglobal.com/product/Chinese-Standard-Single-Girder-Overhead-Crane.html

Email: weihua@craneweihua.com

Single Girder Overhead Crane for Metallurgy

LDY Single girder overhead crane is mainly used for lifting molten metal and foundries in metallurgy. The lifting hoist is YH metallurgy wire-rope electric hoist with lifting capacity reaching 10t.

Single girder overhead crane

The bottom of main girder adopts special heat-insulation treatment with working environment temperature ﹣10℃~﹢60℃, and relative humidity ≤ 50%( 40℃). Design and manufacture meet the requirements of AQSIQ Doc # (2007)375.

This LDY single girder metallurgy overhead crane can be also employed to lift non-molten metal and high temperature solid metal. 

http://www.weihuacraneglobal.com/product/LDY-Single-Girder-Overhead-Crane-for-Metallurgy.html

Email: weihua@craneweihua.com

Double Girder Overhead Crane with Electric Hoist

Product Name: Double Girder Overhead Crane with Electric Hoist

Lifting Weight: 5t-50t

Span: 10.5m-31.5m or other

Lifting Height: 6m-24m

This double girder overhead crane with electric hoist is for lifting 5t~50t stuff. It's very convenient to install in new or existing workshops. This crane is easy to operate with various functions. With the advantages of compact structure, light weight and high lifting height, double girder overhead crane with electric hoist is widely used in workshops, metallurgy, warehouses and assembly shops etc.

Double Girder Overhead Crane with Electric Hoist

Weihua double girder overhead crane with electric hoist has beautiful box-typed welded main girders. Computer optimized design for main girders with good performance and light weight. And the span reaches 40 meters.

http://www.weihuacraneglobal.com/product/Double-Girder-Overhead-Crane-with-Electric-Hoist.html

Email: weihua@craneweihua.com

Overhead Crane with Clamps

Product Name: Overhead Crane with Clamps

Capacity: 35-65t

Span: 27.5-37m

Lifting Height: 12m

The clamp of this overhead crane is parallel to the main girder. The clamp overhead crane is widely used in outdoor and indoor environments such as steel mills, shipyards, ports, storage yards, and warehouses for loading, unloading steel slabs, section bar etc.

Overhead Crane with Clamps

This overhead crane with clamp is a good choice especially for lift and transport different slabs with different clamps basing on the standard and weight of materials (thickness, length and the stack). Also we can provide speed regulation (1:10 or more) for each mechanism and the overload alarm, remote control, PLC control, malfunction detection and display system.

Email: weihua@craneweihua.com

http://www.weihuacraneglobal.com/product/Overhead-Crane-with-Clamps.html

FEM/DIN Double Girder Overhead Crane

FEM/DIN standard double girder overhead crane is designed and manufactured with European standard. The lifting capacity of this FEM/DIN double standard overhead crane can be up to 800t. The trolley is installed between two main girders. Thus it increases the traveling scope of spreader. This crane is with reliable performance, flexible application range, easy to operate and convenient to maintain.

FEM/DIN standard double girder overhead crane

Lightweight and Modular Design:

1. Overall height is 20%~25% lower than traditional cranes;

2. Self-weight is lighter by 20%~30%;

3. Max wheel load reduces 15%~20%;

4. Smaller limiting size increases working scope;

5. Light structure reduces the cost of workshops;

6. Every component designed to be a standard series and interchangeable;

7. Modularization design is easy for transporting;

8. Standard modular design makes good quality and fast delivery.

Advanced Manufacturing Technology:

1. Sandblast pretreatment on steel plates and the surface quality reaches Sa2.5;

2. CNC cutting machine cuts webs plate to insure the curved surface is smooth and accurate;

3. Seams are soldered by automatic arc welding and detected by ultrasonic and X-ray ;

4. The structure of girder and trolley is manufactured by floor-type boring lathe to insure flatness.

http://www.weihuacraneglobal.com/product/FEMDIN-Double-Girder-Overhead-Crane.html

Email: weihua@craneweihua.com

Overhead Crane for Garbage Disposal

The overhead crane for garbage disposal is with a garbage grab, which is an import equipment in city waste incineration plant. Overhead crane for garbage disposal is installed over the garbage pit for garbage charging, transport, mixing and weighing. This garbage disposal crane can be manual, semi-auto and fully auto type.

Manual Type:

Operator control the crane with the linkage console.

overhead crane for garbage disposal

Semi-Auto Type:

The grab operation is manual control, and the auto controlled part includes the moving to charging port, weighing and charging.

Fully-Auto Type:

Once the crane receiving the charging signal from the charge port, the crane starts to do every move automatically, moving to the garbage, lower the grab, grabbing the waste, lifting the waste, moving to the charging port, weighing, charging, and returning the position. It will repeat the same motion automatically.

http://www.weihuacraneglobal.com/product/Overhead-Crane-for-Garbage-Disposal.html

Email: weihua@craneweihua.com