130T Power Plant Bridge Crane Project

Recently, 2 capacity 130t bridge cranes produced by Weihua were used to hoist the stator of the generator set of Shanghaimiao power plant project in Inner Mongolia, which marked the completion of another important step of this project.

130t bridge cranes

The two power plant bridge cranes adopt an excellent electrical control to ensure good performance of the crane, with parameter optimization, rapid matching, safety and reliability, fully control the size and weight of the trolley, reduce the height and structure, and improve the utilization rate of the workshop. It is especially suitable for the power plant with the conditions of limited size, high precision and high safety requirements.



The generator stator of the Shanghaimiao project was successfully lifted into place, laying a solid foundation for the processing of the Ordos Power Transmission Shandong Project, and once again shows Weihua excellent products and execution ability.

https://www.weihuabridgecrane.com/case/130T-Power-Plant-Bridge-Crane-Project.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

26 Grab Buckets for Alcohol Factory Project

Weihua made 26 sets grab buckets for a alcohol factory Project. These grabs are specially designed for brewing industry and is used to grab brewing koji materials, sauces, and sauce-making bulk materials. Now a total of 26 units grab buckets have been completed and ready for customers.

grabs

This product can be also used for the grabbing that require a clean environment to grab bulk materials, such as grain and oil products, fruit and vegetable deep processing, etc.



Features:
The opening and closing mechanism is placed inside the grab bucket, and no hoisting rope tension is required.
The self-weight of the grab bucket all play the role of digging, and the grabbing ability is stronger.
The opening and closing mechanism adopt SEW motor, which is placed inside the grab bucket to avoid damage, which is safer and more reliable and has superior performance.
The open and close limit switches are used to avoid problems such as rope disorder, wire rope breakage and motor overload.
The grabs are designed with food grade 304 stainless steel, which is healthy and environmental protection, corrosion resistance, long service life.

https://www.weihuacraneglobal.com/case/26-Grab-Buckets-for-Alcohol-Factory-Project.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Crane Contactor

The AC crane contactor for crane is suitable for the circuit with frequency 50Hz and voltage to 690V. Crane Contactor is mainly used as the starting switch and commutation of AC motor of a Overhead Crane, Gantry Crane, Suspension Crane, Jib Crane, etc.

AC crane contactor

1. Application: Switching on and off circuit of cranes.

2. This crane contactor is able to operated high frequently, and maximum operating frequency up to 1200 times per hour.

3. Long service life, high safety, multifunctional, environmental protection, multi-specification, Intellectualization, and communicable is the development trend of contactor.

https://www.weihuacraneglobal.com/product/Contactor.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Hoist Motor Brake Pad

This brake pad is suitable for European standard electric hoists, model NR hoists, ND hoists, WH wire rope hoists. It has excellent friction performance with long service life. We provide brake pads with different sizes for your electric motors.

brake pad

https://www.weihuacraneglobal.com/product/Hoist-Motor-Brake-Pad.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Air Switch for Crane Power Supply

Air switch is a kind of circuit breaker. It is a switch that will automatically cut the power as long as the current in the circuit exceeds the rated current. Air switch is a very important electrical appliance in low-voltage power distribution network and electric drive system. It integrates control and multiple protection functions. In addition to completing contact and breaking circuits, it can also protect short circuits, severe overloads and undervoltages caused by circuits or electrical equipment, and can also be used to start motors infrequently.

Air switch

Features:
Rated Voltage: 220V/400V
Certificate: CCC
Environment protection recyclable thermoplastic shell
Weihua provides various air switch for overhead crane, gantry crane, jib crane, etc.

https://www.weihuacraneglobal.com/product/Air-Switch.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Crane Rotary Spreader lifting container

A rotary spreader can work with overhead crane or gantry crane to lift container, steel plate, ladle, steel bar, steel rails, streel scrape tanks, coil roll, paper roll, roller, etc. So, this spreader can be used at container yard, terminals, steel plant, scrap handling plant, paper mill, rolling plant, warehouse, workshop, bulk material handling site, etc.

rotary spreader

Weihua provides all kinds of professional crane spreaders and slings such as hooks, hanging rings, magnets, clamps, grabs, buckets, beams, forklift, etc.



Safety Note:
1. Do not exceed the rated lifting capacity;
2. People are not allowed to pass under the spreader when the spreader is working;
3. Do not disassemble the aviation plug of the electrical appliance when the power is on;
4. Just use the original design function and do not change the function at will. If need to add functions, users shall contact the manufacturer to confirm;
5. Regularly inspect and maintain all mechanical mechanisms and electrical components to ensure the safe and stable operation of all components;
6. After each shift, check whether the spreader structure is damaged and whether the fasteners are loose.

https://www.weihuacraneglobal.com/product/Crane-Rotary-Spreader.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Crane Aviation Plug for hoist and crane

Product: Crane Aviation Plug, Connector

Model: HDC-TG21s-HE016-AG (top access port)

HDC-TS21s-HE016-AG (side access port)

Core: 4, 6, 10, 16, 24, 32, 48 Cores

Current: 16A

Voltage: 500V

Protection: IP65

Shell Material: Cast aluminum alloy

16 Core Plug Size: 115mm*80mm

16 Core Plug Port caliber: 13-18mm

Connector material: Silver-plated copper

Crane Aviation Plug, Connector

Aviation plug is a kind of connector which is electromechanical components that connect electrical circuits. The main function of the aviation plug is to connect the electrical sources that you want to turn off through the plug-in function, and then transmit the signal or current between them, and realize the exchange and sharing of resources through transmission. Crane control panel also adopt aviation plug to arrange cable and connect motor.



Features:

1. Easy to repair

If an electronic component fails, an aviation plug can quickly replace the failed component.

2. Improve the production process

The use of aviation plugs simplifies the assembly process of electronic products and also simplifies the mass production process.

3. Easy to upgrade

With the advancement of technology, new components can be replaced when aviation plugs are installed, and old components can be replaced with new and more complete components.

4. Improve design flexibility

The use of aviation plugs allows engineers to have greater flexibility when designing and integrating new products and when composing systems with components. Because the structure of aviation plugs is becoming more and more diversified, new structures and application fields continue to appear.

https://www.weihuacraneglobal.com/product/Crane-Aviation-Plug.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066