Seamless Slide Wire Conductor for Bridge Crane

The seamless slide wire conductor is without any joints within length 1000m, which is available for 3P, 4P (50A, 80A, 100A, 120A, 140A) with load matching. Meanwhile 3P, 4P can be combined into the 6P or other level. Weihua provides complete seamless slide wire system including components such as hanger clamp, bended joints, Current Collector, towing bracket, end tensioner/feeding, towing arm, carbon brush, support bracket, etc.

The seamless conductor rail system has the features of quick and easy installation, economical and practical, stable operation, fast speed, less noise, flexible power supply, etc.

The seamless slide wire conductor

4P Slide Wire Data:
Rating: 4P, 660V, 50A-120A
Slide wire material: copper
Insulation cover/jacket: Rigid PVC within 75℃
Color: Orange (Eye-catching warning color)

3P Slide Wire Data:
Rating: 3P, 660V, 50A-120A
Slide wire material: copper
Insulation cover/jacket: Rigid PVC within 75℃



Features of Seamless Slide Wire:
1. Application scope: Seamless slide wire for overhead crane power supply.
2. Advanced technological product, non-interruption phenomenon, power supply through oxygen-free copper, good flow pressure rate, conductivity and contact property, convenient to transport and install, not easy to wear, easy replacement, long service life, safe and reliable, and low cost.










A current collector for tube-type multi-pole conductor rail

https://www.weihuacraneglobal.com/product/Seamless-Slide-Wire.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Carbon Brush Current Collector for Bridge Crane and Gantry Crane

Carbon brush current collectors for Overhead Crane can be single pole busbar collector, multi-pole busbar collector, seamless conductor rail collector, copperhead conductor rail collector, etc. Its performance, quality, material and the structural components of the material will directly affect the safe operation quality of the whole system equipment. Therefore, the current collector is one of the most important component of the entire conductor rail system. For your different requirements on current, busbar type or installation, we always offer you the right current collector and solutions.

Carbon brush current collectors

The carbon brush current collector is composed of carbon brush, stainless metal part and wear resistant plastic part. Spring can make the carbon brush maintain uniform contact. There is a traction arm for each group collector. The double collector system can be used for guiding device or higher current device.



The jointless conductor rail current collector is one of the main devices for picking up electric energy from the collecting side of the conductor system, and the electric energy is directly transmitted to the electric appliance through the sliding contact between the collecting brush and the guide rail, thereby realizing mobile power supply of cranes.



The current collector consists of a mechanical structure tension device and a collector brush that directly contacts the guide rail. The tension device of the mechanical structure determines the sliding contact pressure of the collector brush and the guide rail and the stability of the mechanism. The brush is the conductor of the sliding contact of the guide rail to pick up the electric energy.













A current collector for multi-pole tube conductor

https://www.weihuacraneglobal.com/product/Carbon-Brush-Current-Collector.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Travel Switch for Crane Hoist

Travel switch is a travel limit and terminal protection for the crane traveling or hoisting. The travel switch can be a trolley travel switch. When the trolley approaches the limit position, the operation is stopped in one direction and can be operated in the reverse direction. The function of a crane travel switch is similar to the trolley travel switch.

Travel switch

1. Application scope: Interlock protection.
2. This travel switch is a usual master switch.
3. Its functional principle is like buttons: Switching circuits based on the routing position of traveling parts.
4. The travel switch could be widely used in many areas, like various machines and cranes.

https://www.weihuacraneglobal.com/product/Travel-Switch.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Hoist Crane Electric Distribution Box

This single-girder crane distribution box is for the electrical power distribution of non-standard CD type and MD type hoist and full set hoist crane. It has built-in electrical appliances such as total contactor, control transformer, phase sequence, etc. And it has protection functions such as short circuit, overload, phase loss, phase error, zero voltage protection, and overcurrent.

distribution box

This distribution box is not suitable for working in flammable and explosive media or with high humidity and acid and alkali gases, and it is also not suitable for working in environments where molten metal, toxic and flammable materials are lifted. (If you need to work in a special environment, please specify)



This distribution box can be built-in the electric control room

Specification:
1. Control voltage: 36V-380V
2. Operating voltage: 380V
3. Model: DK1, DK2
4. Phase sequence protection, loss of voltage protection
5. Scope of application: electric single girder crane; electric suspension crane, double girder crane with hoist.

https://www.weihuacraneglobal.com/product/Hoist-Crane-Distribution-Box.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Circuit Breaker for crane power supply

Circuit breaker is used to cut off fault circuit of power supply system of a overhead crane or gantry crane.

Circuit breaker

1. Application: this circuit breaker is for cut off fault circuit.



2. Two types: high voltage circuit breaker and low voltage circuit breaker. The demarcation line is not so clear, and which beyond 3KV is usually called high voltage circuit breaker.

3. The function of circuit breaker is to protect power circuit and electric motor.

4. Circuit breaker is usually constituted by contact system, arc extinguishing system, operating mechanism, the release and the shell.

5. Low voltage circuit breaker is also called air switch, and used to connect or cut off the load circuit. It also could be used to control the electric motor which is not frequently start.

https://www.weihuacraneglobal.com/product/Circuit-Breaker.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Lifting Height Limiter for hoist, crane

Working principle of lift height limiter: when the crane rises, the crane wire rope drives the crane wire rope guide to move, the rope guide drives the contact on the limiter, the contact drives the limit rod, and the limit rod drives the limiter to move left or right, and disconnect the two power supplies in the up or down contactor entry, the motor is powered off and stopped, then the working of the limiter is completed.

lift height limiter

1. Application scope: Power distribution cabinet and vertical transport machinery.
2. The lifting height limiter can be installed in the power distribution cabinet or next to the winch.
3. Simple structure, quick action, safe and reliable, automatic control.

https://www.weihuacraneglobal.com/product/Lifting-Height-Limiter.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Crane Track Rails for Overhead Crane, Gantry Crane, Portal Crane, STS, RMG Crane

Crane rails are the main body of crane tracks. Crane rails provide a continuous, smooth and low-resistance rolling surface for the crane wheels. It is employed to guide the wheels of the crane, bear the pressure of the wheel, and transmit it to the sleeper and ground. Weihua provide various crane rail models such as P24, P38, P43, QU70, QU80, QU100, QU120, etc. for the different crane and special conditions.

Crane rails 

Features of Crane Rails:
1. Application: Rails/tracks for Overhead Crane, Gantry Crane, RMG, Project Crane, etc.
2. Pulling wire rope to detect the linearity of rails. Pulling a diameter 0.5mm wire rope between two ends stop lever, and using a plumb bob to detect point by point, and the interval should be 2 meter.
3. The crane rail joints could be cut into straight joint or 45°oblique joint.
4. P shape rail is the most commonly used.

https://weihuacraneglobal.com/product/Crane-Rails.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066