我的博客列表

2021年10月8日星期五

Fixed Dock Crane Mast Crane, Derrick 660t

Fixed dock cranes (or mast crane, or derrick) are commonly seen at dockside for lifting materials and goods between vessels and shore. This dock crane is composed of platform, hoisting mechanism and luffing mechanism, which is for handling 22,000m3 LPG tank.
Fixed dock cranes



Lifting Capacity: 2*330t
Luffing: 21.5-54m
Front Boom Length: 70m
A-Frame Mast Diameter: 1.6m




Features:
1. Adopt 4 driving system for lifting mechanism, and 2 driving system for luffing mechanism.
2. The entire mast crane chassis adopt basin support on concrete platform, which can effectively ease the crane horizontal and vertical deformation.
3. Multi-layer winding line reel drum. Hoisting winding drum wrapped with 4 layers of wire rope, and luffing drum is wrapped with 5 layers of wire rope.
4. Complete frequency, lifting half load speed is 2 times of the full load speed.
5. Using inverter, encoder and a series of electronic control system to ensure the 4 lifting motors keep synchronous running.




Email: weihua@craneweihua.com
WhatsApp: +86 15093392066

2021年9月21日星期二

Container Straddle Carrier at Seaport Terminal for Container Transmit and Handling

The most common application for straddle carriers is for container handling in port terminals and container yards. Container straddle carriers are used for stacking and moving containers. These straddle carriers have the ability to stack containers up to 4 layers. The running speed can be up to 30 km/h with full load. The workers can sit at the top so that they can see situations of front and back.

The normal capacity of Weihua straddle carriers is 35t, and the Max. design capacity is 60 t (59 long tons; 66 short tons) same as 2 full containers.
straddle carriers









Email: weihua@craneweihua.com
WhatsApp: +86 15093392066

Steel Sheet Profiling Truck for Sheet Tile Making at Roof Top

Steel sheet profiling crane is a truck mounted crane for roof covering steel profiling and lifting to building roof. The building mainly refer to the steel structure building such as workshop, warehouse, storage, etc. The high-altitude steel roof making truck crane has the lifting mechanism and metal roof panel making equipment. It is mainly used for the making and lifting steel roofing tiles on the high-altitude roof. The color steel tile/panel profiling and transfer can be realized in one truck and the steel roof panels can be made into any length. It is of high efficient and energy-saving, which can quickly complete the actions such as installing the steel coils, lifting the profiling equipment to the roof height and continuing making steel panels.

Steel sheet profiling crane



This crane is composed of base (Chassis, subframe, legs), lifter (Turntable, boom, balance mechanism, steel sheet profiling machine), hydraulic and electric system. So it can carry out lifting, steel sheet carrying, steel sheet forming and transport. This machine is completely changing the traditional construction mode. 8,000 meters of tiles can be easily made on the roof every day. The entire truck crane investment can be recovered in 4 to 5 months.
Capacity: 6t~12t
Lifting height: 16m~23m.




Features of Steel Sheet Profiling Crane:

1. Combine of steel sheet transport and forming.
2. Lifting from ground up to building roof.
3. Hydraulic drive, simple structure, easy maintenance.
4. PLC control, both panel control and remote control.
5. Easy change of different model of steel sheet profiling machine.
6. Max. height of building can reach 23m. Max. capacity: 12t.
7. Max. thickness of steel sheet: 1mm. And length is flexible.
8. Light weight.
9. Instead of hiring 20 people and several truck cranes for the construction, this crane only need 5 people and no truck crane, saving labor costs and construction costs.
10. 3 patents.


In 2014, Weihua took the lead in the development of high-altitude steel tile profiling and lifting truck. The product obtained the qualification of the entire vehicle production from the Ministry of Industry and Information Technology, and has obtained the national invention patent and the first (set) major technical equipment certification of Henan Province. In 2017, the local standard of this product drafted by our company was formally released. Welcome to visit us and inspect this machine.


Email: weihua@craneweihua.com
WhatsApp: +86 15093392066

2021年9月15日星期三

Yacht Crane, Rubber Tire Mobile Boat Hoist Gantry Crane

The yacht crane is a rubber tire gantry crane for handling of yacht and boat. It is composed of main structure, traveling wheel group, hoisting mechanism, steering mechanism, hydraulic transmission system and electric control system. The gantry crane has a N type structure, which allows boat/yacht height surpass crane's height.

yacht crane


According to different needs, the yacht crane is able to handle different tonnage boats and yachts (10 ~ 800 tons) from the shore side. This crane can be employed for maintenance of boats on the shore side or put a new yacht into the water. This yacht handling crane is with soft but firm belt to lift the boat without hurt to the surface. This crane also can put the boat or yacht in sequence quickly with small gap between each boats.






Features of Rubber Tire Yacht Crane:

1. For the crane tires running, this yacht crane can move in diagonal direction, it can also steer in 90 degree and put the boat in any designated position.

2. The width of his yacht crane main girder can be adjusted in case to handling different width boats.

3. This yacht handling crane is cost effective with high performance, simple operation and maintenance.

4. Remote control.














Email: weihua@craneweihua.com
WhatsApp: +86 15093392066

Gantry Crane for Stone Factory for marble, granite, slate handling

Gantry cranes for stone factory are used for stone (Marble, granite, slate, etc. ) handling outdoor at stone processing factory. Stone block or cubic stonework with different size and weight can be lift and transfer by the gantry crane to the processing point. This gantry crane can be designed according to the requirement, including single girder, double girder or truss type (lattice beam), cabin control or remote control, electric hoist or trolley, lifting weight, lifting height or span, etc.

Lifting Capacity: 0.5t ~ 100t or other
Lifting Height: 2m ~ 18m or other
Span: 3m ~ 30m or other
Work Duty: A4 ~A7
Gantry cranes for stone factory



Features of Gantry Crane for Stone Factory:

1. CNC cutting for beam girders with high deflection accuracy;

2. Auto welding robot for precise automatic welding;

2. Shot-blasting Sa2.5 for steel plates and structure with stress release;

3. Epoxy zinc rich coating and painting with paint thickness 2x2 with 140μm;

4. 10.9 class bolts connect girder/beam and legs;

5. Three-in-one motor with vertical gear motor driving;

6. Motors with High protection class IP55, F class, 40% ED. Reducer, motors and electrics adopt China or world brands such as Schneider, Siemens, ABM, SEW etc;

7. End carriage beam equipped with anti-friction bearings, cellular rubber buffers, and derailment protectors;

8. Anti-sway system, precise positioning.


Email: weihua@craneweihua.com
WhatsApp: +86 15093392066

2021年9月5日星期日

Wood Handling Crane with Gantry and Grab Arm 66t

In November 2017, the MG66t wood handling gantry crane manufactured by Weihua Group was shipped to Russia and completed the installation, which works with the timber loader manufactured by the German Sunni Bergen Group at the paper mill. The crane not only needs to meet the requirements of a low-temperature environment, but also fully matches the performance of the Sunni Bergen loader, and satisfies the stability and balance of the loader arm length, lifting, and 360-degree rotation in the working range. And the electrical control system of the crane should be docked with the electrical control system of the loader to complete the work.
MG66t wood handling gantry crane










The customer's high-tech standards also put forward higher requirements for Weihua. Weihua strictly controlled each weld seam according to the process requirements, and the whole crane was subjected to ultrasonic weld flaw detection, and the connection chassis of the loader and the trolley was carried out at the installation site with the precise connection. In the extreme environment and strict requirements, it is a new challenge and a huge test for our products.











Email: weihua@craneweihua.com
WhatsApp: +86 15093392066

Cargo Ship Deck Crane

Cargo ship deck cranes are developed for the loading and unloading of cargo on general cargo ships, container cargo ships, bulk carriers and other transport ships. This crane has carried out the full-load and overload test, successfully passed the certification acceptance of China Classification Society.

 

cargo-deck-crane
Cargo ship deck cranes

 

The hydraulic system of the cargo ship deck crane adopts a closed system instead of the open system, solving the problem of the difficult lifting brake control. The successfully applying the closed system makes the hydraulic oil consumption reduced by more than half compared to the open system deck cranes, and the power consumption has also been greatly reduced. This is a major breakthrough in energy saving and environmental protection. This crane has obtain 6 national patents.

 

cargo-ship-deck-crane

 

1. Built-in machine, electric, hydraulic, integrated system.

2. Fully hydraulic drive.

3. Self-diagnosis wave compensation system.

4. Luffing load horizontal movement technology.

5. Eight safety devices including torque limiter, etc.

6. Visible safety monitoring system.

 

deck-crane-on-ship

 

ship-deck-crane


https://www.weihuagantrycrane.com/product/Cargo-Ship-Deck-Crane.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066