Crane Cable Carrier / Weihua Crane

 The crane cable carrier is used for the suspension and movement of the cables of the crane for mobile power supply, which has been widely used in various lifting machinery with the features of sturdy structure, mobile and flexible, Safe and reliable. This cable carrier can hold flat cable and round cable, running under C-rail or I-rail.

 

crane cable carrier

 

The cable carrier is device helping power supply of the crane trolley or hoist. It is composed of walking wheels, brackets, and pallets. The cable is hold on the pallet, and the traction frame is synchronized with the cable trolley to achieve the power supply for the trolley. Weihua cable carriers are divided into medium load type, heavy load type and light load type. Therefore, the wheels are Ф80, Ф63 and Ф50. And the load capacity is ≤50∽150kg. The pallet layers can be single Layer, double layer, and triple layer. The carrier at the head end is a tractor carrier, the end is a fixed cable rack, and the middle is the cable trolley.

 

 

Note:

1. After the fixed cable rack is installed, a baffle should be hung on the back;

2. Adjust the traction head so that the trolley does not touch the upper and lower edges of the traction hole during the entire travel;

3. The cable length is 1.2 times of the span of the crane and plus 8 meters.

4. Adjust the traction wire rope so that its length is less than the length of the same section of the cable. The traction wire rope is stressed during operation.

5. When the cable diameters are not equal, the cable clamps should be padded with soft rubber so that the outer diameters are basically the same in order to clamp the cables.

6. When laying cables, consider the balanced force on both sides of the cable support plate.

7. When the cable carrier has two or three layers, the requirements are the same.

8. The double washer on the carrier is an adjusting washer. When the guide rail is not suitable, put the washer on the inner side of the fixed plate to adjust the width of the gauge. It is made according to the guide rail specifications 100*68*4.5, 120*74 *5, 140*80*5, 160*88*6. Non-standard pulleys are processed according to drawings.

 

https://www.weihuacraneglobal.com/product/Crane-Cable-Carrier.html

Email: weihua@craneweihua.com

Graphite Electrode Crane

 Graphite electrode crane is a multifunctional overhead crane which can realize the functions of automatic storage of graphite electrodes, graphite grouping, film winding, strings, automatic switching of single and double rows. The lifting part of the crane can realize the overall loading and unloading of single or double rows of multi-specification graphite electrodes. And lifting the furnace cover. It turns the complexity into simplicity. This product improves the product quality of graphite electrodes and truly realizes the efficient production of graphite electrodes.

 

Graphite electrode crane

 

Features:

1. Reasonable structure design; The graphite electrode string device adopts the main and auxiliary hydraulic propulsion device, mobile packing device, automatic drop device, damping roller device, etc., which are flexible and exquisite;

 

2. This product is a Weihua's original intelligent multi-functional graphite electrode crane, which can meet various specifications of electrode loading and unloading. At the same time, the spreader is equipped with furnace cover hooks that are suitable for furnace cover lifting and transportation to meet various needs of customers.

 

 

3. The complex spreader of this product is an innovative design, which not only satisfies the loading and unloading of single and double rows of graphite electrodes, but also satisfies the hoisting of the furnace cover. The design structure is cleverly used, and the safety device is set reasonably, which not only satisfies the large tonnage handling, but also satisfies the refined operation.

 

4. Weihua Technology Center has created an advanced graphite electrode handling crane for this field. This equipment will change the existing graphite electrode preparation method and is a brand-new creativity for the market.

 

 

 

https://www.weihuacraneglobal.com/product/Graphite-Electrode-Crane.html

Email: weihua@craneweihua.com

 

Chain Hoist 2 Ton Capacity

This video shows a Chain Hoist (Email: weihua@craneweihua.com) 2 Ton Capacity. Weihua provide capacity 0.25t to 50t electric chain hoists, manual chain hoists, European standard chain hoists, explosion-proof chain hoist, metallury use chain hoists, etc. 

https://www.weihuacraneglobal.com/product/Chain-Hoist.html

Rubber Tire Container Gantry Crane - RTG 35 Ton

This is a rubber-tire container gantry crane - RTG 35t (Email: weihua@craneweihua.com) working at a terminal in China, handling containers at container yard. 

https://www.weihuacraneglobal.com/product/Rubber-Tyred-Container-Gantry-Crane--Rubber-Tyred-Gantry-Crane.html

Polyurethane Buffer / Weihua Crane

 1. Application scope: Polyurethane rubber buffer for crane and trolley anti-collision. 

2. Polyurethane Buffer with Good hardness, good strength, quick recovery, oil resistance, weak acid and alkali resistance, and anti-corrosion.

3. Light dead weight, simple structure, low manufacturing cost and convenient to install and maintain.

4. Basing on Polyurethane Buffer connection mode, polyurethane buffer could be divided into three series: stud type (JHQ-A), platen type (JHQ-B) and flange-plate type (JHQ-C). There are 14 to 21 specifications for each series, and each specification is corresponding to one buffer capacity.

 

 

 

Polyurethane Buffer

 

 

 

https://www.weihuacraneglobal.com/product/Polyurethane-Buffer.html

Email: weihua@craneweihua.com

Crane Electric Room Air Conditioner

 Crane electrical room air conditioner is used in electrical room or girder chamber of heavy-duty cranes, which is a new generation product with international and domestic advanced technics and refrigeration accessories. Each model has been tested by the national-level approved and authorized experimental testing center. It has beautiful appearance, superior performance, convenient installation and maintenance, stability and reliability.

 

Crane electrical room air conditioner

 

The cooling capacity ranges from 8KW to 210KW, which can be divided into two categories: air-cooled and water-cooled. The product series and models are various to meet the needs of different users. They are widely used in various industrial field such as steel plants, chemical plants, paper mills, printing plants, power plants, substations, clothing factories and various electrical control rooms.

 

 

Application:

The AC unit can achieve year-round refrigeration in an ultra-wide environment temperature range (-30℃ to 60℃), which can better meet the all kinds of electrical control rooms; the anti-corrosion technology of the Air Conditioner can completely solve the problem of air corrosive phenomenon in paper mills and chemical plants to avoid the problem of leakage caused of copper pipe.

 

 

Diversified Forms and Functions:

Crane electric room air conditioners have two categories: direct air supply and top air supply. In accordance with the requirements of different working environments and the functional needs of different places, the AC can be single cooling type, cold air electric heating type, cooling and heating heat pump type, cold air steam coil heating type, and heat pump electric auxiliary heating type.

 

Direct Air Supply Type:

The direct air supply type AC uses two-way leaf windows to blow air. The air supply distance is long and the air volume is large. It has the features of simple, flexible. As well as it reduces the user's installation works, lowers the investment, and meets the needs of users in various spaces. And it can be put into use quickly.

 

 

Top Air Supply Type:

The top air supply type AC adopts ducted air supply. One air conditioner can be shared by multiple rooms. The number of air outlets and installation positions are selected according to the environment of each section to meet the needs of balanced temperature control and ventilation in large spaces. By introducing fresh outdoor air, And it equipped with a filter device to ensure fresh and healthy indoor air.

 

Perfect Control, Simple Operation:

The air-conditioning unit in the electrical room has a control panel, and a manual operator is installed on the control panel to conveniently control the working of the AC unit. The unit adopts a single power connection without additional control power. The unit control system includes compressor overload protection and motor winding Protection, refrigeration system high- and low-pressure protection, water flow protection and other multiple safety protection measures to ensure safe operation.

 

The design of the AC unit is flexible, with direct air supply, upper air supply and lower air supply, which can easily meet the needs of on-site installation.

The smart and simple design makes maintenance extremely convenient. All the parts of the unit can be directly inspected and repaired from the front without stopping the machine.

https://www.weihuacraneglobal.com/product/Crane-Electric-Room-Air-Conditioner.html

Email: weihua@craneweihua.com

Weihua Metallurgical Crane Reference

Weihua carried out many metallurgical EOT crane (Email: weihua@craneweihua.com) projects for many big steel plants in China and overseas. Here are the images for you reference.

https://www.weihuacraneglobal.com/product/Overhead-Crane_1.html