Crane Cable Carrier / Weihua Crane

The crane cable carrier is used for the suspension and movement of the cables of the crane for mobile power supply, which has been widely used in various lifting machinery with the features of sturdy structure, mobile and flexible, Safe and reliable. This cable carrier can hold flat cable and round cable, running under C-rail or I-rail.

 

crane cable carrier

 

The cable carrier is device helping power supply of the crane trolley or hoist. It is composed of walking wheels, brackets, and pallets. The cable is hold on the pallet, and the traction frame is synchronized with the cable trolley to achieve the power supply for the trolley. Weihua cable carriers are divided into medium load type, heavy load type and light load type. Therefore, the wheels are Ф80, Ф63 and Ф50. And the load capacity is ≤50∽150kg. The pallet layers can be single Layer, double layer, and triple layer. The carrier at the head end is a tractor carrier, the end is a fixed cable rack, and the middle is the cable trolley.

 

 

Note:

1. After the fixed cable rack is installed, a baffle should be hung on the back;

2. Adjust the traction head so that the trolley does not touch the upper and lower edges of the traction hole during the entire travel;

3. The cable length is 1.2 times of the span of the crane and plus 8 meters.

4. Adjust the traction wire rope so that its length is less than the length of the same section of the cable. The traction wire rope is stressed during operation.

5. When the cable diameters are not equal, the cable clamps should be padded with soft rubber so that the outer diameters are basically the same in order to clamp the cables.

6. When laying cables, consider the balanced force on both sides of the cable support plate.

7. When the cable carrier has two or three layers, the requirements are the same.

8. The double washer on the carrier is an adjusting washer. When the guide rail is not suitable, put the washer on the inner side of the fixed plate to adjust the width of the gauge. It is made according to the guide rail specifications 100*68*4.5, 120*74 *5, 140*80*5, 160*88*6. Non-standard pulleys are processed according to drawings.

 

https://www.weihuacraneglobal.com/product/Crane-Cable-Carrier.html

Email: weihua@craneweihua.com

Crane Brake / Weihua Crane

Crane brake is an important parts for Overhead Crane or Gantry Crane, which can decelerate and stop the running of a crane.

 

Crane brake

1. Application: Crane brake is for the moving parts deceleration.

2. There are 2 types: friction brake and non-friction brake.

3. Crane brake is mainly constituted by brake pad, brake arm, brake wheel and brake releaser.

4. To reduce the braking torque and the size of brake frame, the brake is usually installed on the high-speed shaft. To meet the needs of high safety for large machinery, like mine hoist and elevator, the brake should be installed on the low-speed shaft which next to the working parts the large machinery.

 

 

 

https://www.weihuacraneglobal.com/product/Brake.html

Email: weihua@craneweihua.com

Crane Reducers / Weihua Crane

1. Application scope: Electric hoist traveling mechanism, reducers for crane.

2. Widely used in transmission equipment of mining, metallurgy, chemical industry, building material and light industry, etc.

3. The crane reducer should meet the mechanical strength needs when it's used in cranes.

4. Crane reducer mainly used in mechanism of lifting, traveling, rotating and amplitude.

5. The needs of suspension-suit-type gear reducer which is installed in traveling mechanism are small volume, light weight and compact structure; and its output end should be Internal spline which is directly installed in wheel shaft, input end should pass through a coupling and be connected with brake motor by flange; and its top should have holes for pin shaft and buffer device to fix on frame.

6. Crane motor and converter-speed-regulating motor for metallurgy are squirrel-cage rotor motor. Squirrel-cage rotor motor could meet the needs of different working conditions, such as frequent starting, braking, overload, reversing, over speed, collision and vibrating. And it also could meet the need of working under invert control, to realize soft start and four-quadrant operation. 

 

 

 

crane reducer

 

 

 

 

 

 

 

 

 

320 Ton Crane Reducer

https://www.weihuacraneglobal.com/product/Reducers.html

Email: weihua@craneweihua.com

Wire Rope Reel or Drum / Weihua Crane

1. Wire Rope Reel/Drum Application: Crane accessories for reeling wire rope as a winch or electric hoist.

2. Drum units is constituted by drum, shaft, gearwheel, hub, bearing body and bearing.

3. The material of wire rope drum is usually no less than HT20-40 cast iron, ZG25,ZG35 or Q235B, Q345B welding steel plate is also able to be the material for special needs. 

4. Drum units applies to the large tonnage crane machinery which needs high-performance.

 

Wire Rope Reel/Drum

 

 

Wire Rope Drum Packing

 

 

https://www.weihuacraneglobal.com/product/Wire-Rope-Reel.html

Email: weihua@craneweihua.com

Overhead Crane for Vietnam Client from China

Double Girder Overhead Crane (Email: weihua@craneweihua.com) for Vietnam Client from Weihua Group, China , QD 35 / 15t, 16m.

https://www.weihuacraneglobal.com/product/Overhead-Crane-with-Electric-Hoist--Double-Girder-Overhead-Crane.html

Clean Type Electric Hoist Crane

This Clean Type Electric Hoist Crane (Email: weihua@craneweihua.com) is Driven by aseptic reducer, greasing with food grade gear oil without noise, Hoist mechanism with clean type chain hoist.

https://www.weihuacraneglobal.com/product/Clean-Type-Electric-Hoist-Crane.html

Email: weihua@craneweihua.com

Chain Bucket Car Unloader / Weihua Group

As a kind of unloading and stacking unloader equipment which is used for the bulk materials on the railway, the chain bucket car unloader is mainly applied to the car unloading in the thermal power plants, factories and mines and port railway lines. The chain bucket car unloader shall stretch across the railway wagon to apply chain bucket to take the coal and adopt the tape conveyor to transmit the materials. Therefore, it is unnecessary to open the car door with high working efficiency and favorable economic benefits; It can unload coals beyond the truck for several meters.

chain bucket car unloader

It is good for continuous unloading; Due to the stable traveling speed and transport capacity, it is convenient to cooperate with other machineries to accomplish the stacking task just one time. The chain bucket car unloader is composed of engine body, bucket hoisting device, winch, tape conveyor, traveling mechanism, etc. 

https://www.weihuacraneglobal.com/product/Chain-Bucket-Car-Unloader.html

Email: weihua@craneweihua.com