Boat and Yacht Handling Crane / Weihua Crane

Yacht handling cranes, also known as boat handlers. It is widely used in water sports games, yacht clubs, navigation, shipping and learning, etc. It can transport different tonnage (32 tons - 1000 tons) of boats or yachts from the shore dock for on-shore maintenance, repair or launching of new vessels.

The boat and yacht handling crane includes the following items: main structure, traveling wheel block, hoisting mechanism, steering mechanism, hydraulic transmission system and electric control system. The main structure is N type, which can transfer the boat/yacht with height surpass crane's height.

Yacht handling cranes

According to different requirements of our customers, the boat handling crane can handle different tonnage boats or yachts (10T-800T) from the shore side, it can be used for the maintenance on the shore side or can put the new boat into the water. This yacht handling crane has soft and firm belt to lift the boat and yacht so that it will never hurt the surface. This crane also can put the boat in sequence quickly with small gap between each two boat.

Features of Yacht Handling Crane:

1. For the crane traveling, this crane can move in diagonal direction, this boat and yacht handling crane also can steer in 90 degree and put the boat in any designated position according to requirements.

2. This crane can be adjusted the width of the main girder according to the boat in case to handling different side boat.

3. This yacht handling crane is of low expense, high performance, easy to operate and maintenance and so on.

4. Low cost on the daily operation, it adopts the soft and firm belt to ensure there is no harm to the boat when hoisting.

5. This boat crane can make the boat in order quickly; it also can adjust the gap between each boat according to different condition.

http://www.weihuacraneglobal.com/product/Boat-and-Yacht-Handling-Crane.html
Email: weihua@craneweihua.com

Rubber Tyred Container Gantry Crane / Weihua Crane

Rubber tire container gantry crane is employed to handle containers, boats/yacht, large component at the loading/unloading places and container yard. This rubber tyred crane is fitted with multiple hooking point's spreaders to meet the needs of different lifting situations. The whole crane can carry out 360° steering with flexible movement.

Rubber tire container gantry crane

Full hydraulic drive for crane traveling mechanism and lifting mechanism with Step less speed change. The long traveling use hydraulic closed circuit with good transmission efficiency, less fault. There are safety indicator and overlord limiter to ensure safety of operators and products. All operation are controlled by CAN-BUS control.

Features of Rubber Tyred Container Gantry Crane:

1. Rubber tyred container gantry crane is usually called RTG for short, which is employed to stack containers in container storage yards. Rubber tyred container ganry crane is flexibly moved by its own rubber tires for transshipping containers.

2. Weihua rubber tyred container gantry crane is equipped with specialized spreaders to lift standard-sized 20GP, 40GP, 45HQ containers and hydraulic storage tanks.

3. The trolley and crane traveling mechanisms equip three-in-one reducer with convenient maintenance.

4.  The tires of this container gantry crane can rotate 90°and move obliquely at 20° and 45°.

Full Set Rubber Tyre Gantry Crane Fixed at the Cargo Ship Deck

http://www.weihuacraneglobal.com/product/Rubber-Tyred-Container-Gantry-Crane--Rubber-Tyred-Gantry-Crane.html
Email: weihua@craneweihua.com

2 Gantry Cranes Lifting Crane Girder Synchronously

The video shows 2 single girder gantry cranes (Email: weihua@craneweihua.com) are working together handling a crane beam/girder synchronously in Weihua Crane factory. Weihua gantry cranes can be used for multiple cranes (2-4 crans) linkage operation.

http://www.weihuagantrycrane.com/product/RMG-Crane-for-Steel-Track-Handling.html

Warehouse E.O.T Crane

This is a single girder E. O. T crane (Email: weihua@craneweihua.com) in reducer warehouse. It is equipped with electric hoist.

http://www.weihuacraneglobal.com/product/Chinese-Standard-Single-Girder-Overhead-Crane.html

Container Rail Mounted Gantry Crane / Weihua Crane

Features of Weihua Rail Mounted Gantry Crane for Container Handling:

1. U-type frame, double cantilever with rod, strong, light weight.

2. Large gantry span and width, continent container loading and unloading

3. 360° rotating spreader with excellent adaptability and efficiency.

4. Long Traveling Mechanism Assembly

5. Frame/Gantry Assembly

6. Trolley Assembly

7. Electrical Control System

8. All digital frequency conversion and PCL control technology

9. High Precision Sensor Data Acquisition Technology

10. Industrial computer data analysis and processing system

Rail-type container gantry crane is mainly consists of the steel structure, lifting mechanism, micro-transfer mechanism, spreader anti-sway system, crane travelling mechanism, container spreaders, electrical equipment, and other necessary auxiliary equipments.

The container rail mounted gantry crane adopts frequency conversion, PLC control system and CMMS fault detection system. Main standard reference: GB/T19683-2005, JT/T566-2004, and ISO standard of International Standardization Organization, European FEM, Japan JIS standard.

Features of Container Rail-Mounted Gantry Crane:

1. This crane can be used in inland terminals, container yard, rail freight station, coastal freight yard and frontier wharf.

2. Adopt dedicated container spreaders which can handle 20 feet, 40 feet and 45 feet containers.

3. Electrical drive system is full digital AC frequency conversion, PLC control speeding, CMS intelligent monitoring and management system, the running state real-time monitoring equipment.

4. The upper trolley can rotate 270 degree for easy load and unload.

5. Three-in-one reducer is adopted for long travel and cross travel, easy maintenance.

6. Safety protection: Anti-breaking shaft, wind warning, anti-tipping, etc.

Weihua Rail Mounted Gantry Crane

Depending on the constitution of main girder, outriggers and anti-sway device, container rail mounted gantry crane can be divided into different types.

1. Double cantilever gantry crane has big room between its outriggers for containers to pass through. Usually opening widely at upper parts to form a shape of U and combining with the girder forming a shape of N.

2. Non-cantilever crane has a simple structure because of containers do not need to pass through the room between its outriggers.

Compared with ship-to-shore gantry crane, the trolley of Rail Mounted Gantry Crane travels at a lower speed and usually equipped without anti-sway stabilizer, while it will be equipped with anti-sway device if users need it for reducing operation stress and improving production efficiency. For rope type lifting mechanism, increasing the rope damp is a usual way to accomplish stabilization. And for rigid type lifting mechanism, its own rigid components are available to accomplish stabilization.

http://www.weihuacraneglobal.com/product/Container-Rail-Mounted-Gantry-Crane--Rail-Mounted-Gantry-Crane.html
Email: weihua@craneweihua.com

Gantry Crane for Maglev Train Handling / Weihua Crane

The Gantry Crane for maglev train handling is a Double Girder Gantry Crane for the installation and commissioning of high-speed 600km/h maglev trains, is responsible for the production and lifting work of the train project. The gantry crane has the characteristics of light self-weight, small wheel pressure, maintenance-free, stable operation, low noise, saving plant space, energy saving and environmental protection. Weihua provides all kinds of Project Crane, Container Crane, Overhead Crane, Electric Hoist and Crane Components, etc.

Gantry Crane for maglev train handling

On May 23, China's 600 km/h high-speed maglev train launching in Qingdao. This is a big breakthrough of high-speed maglev technology in China. As an emerging high-speed traffic mode, high-speed maglev train has the advantages of high speed, safety and reliability, low noise, low vibration, large passenger capacity, punctuality and low maintenance.

In recent years, Weihua intelligent cranes are easily found in machinery, metallurgy, mining, electric power, water conservancy, aerospace, railway, port, petroleum, chemical and other industries, serving many large enterprises and key projects in China and overseas, such as launching of Shenzhou spaceships, Long March rockets, and Tiangong detectors successfully.

Why Weihua?

1. 31 years' experience, 6800 employees.
2. Weihua covers an area of 3, 420, 000m2 with a 60,000m2 workshop.
3. Total 10 crane series with 300 kinds of products including annul output of 30,000 hoists and 6000 overhead & gantry cranes.
4. 600 people R&D team, 494 patents, national level technical test center, CNAS laboratory and 2000 production & test equipment.
5. With 15 subsidiaries, Weihua is located in China`s crane production base.
6. Our products are exported to 110 countries such as Thailand, Malaysia, Russia, Mexico, Iran, etc.
7. The company and products obtain the certificates such as ISO9001, 14001, OHSAS18001, CE, EAC, CUTR, SGS, BV, etc.
8. Products are of world standard such as FEM, DIN and CMAA. Electrical systems and accessories use world-renowned brands such as: SEW, SIMENS, Schneider.
9. Cooperation with Samsung, Port Authority of Thailand, ArcelorMittal, Malaysia Country Garden, CASC, etc.

http://www.weihuacraneglobal.com/product/Gantry-Crane-for-Maglev-Train-Handling.html 
Email: weihua@craneweihua.com

Rotary Trough Crane for Steel-making Industry

This crane is a overhead crane (Email: weihua@craneweihua.com) with special spreader to handle rotary trough in steel making industry. The spreader can lift, transport, rotate the metal scrap trough.

http://www.weihuabridgecrane.com/product/Rotary-Trough-Bridge-Crane-for-Steelmaking.html