Gear Motor for hoist and crane

The gear motor is a 3-in-1 drive equipment which combines motor, reducer / gear box and brake into one machine. This product can be used for overhead cranes, gantry cranes, trolley / crab and electric hoists. Weihua provides the dedicated gear motor for cranes with features of parallel output with motor shaft, compact structure, big transmission torque, smooth work, low noise, and long life, etc.

gear motor

Features of Gear Motor for Cranes:
1. Small gear impact and less noise;
2. Output shaft with carburizing quenching, big bearing capacity;
3. Covering plate with high rigidity alloy casting, more solid and secure;
4. Reducer adopts German electromagnetic brake technology with stable performance;
5. Small starting current, big torque, gentle starting and brake; small impact, low noise, smooth running speed; it can be frequently started with high work duty and long service life;
6. ABM gearbox;
7. Closed structure design, good lubrication, long life and low noise;
8. 20CrNiMo low carbon alloy steel gears are processed by carburizing and quenching and grinding, and the tooth surface hardness is above 60HRC;
9. Maintenance-free design.

https://www.weihuacraneglobal.com/product/Three-in-One-Motor-for-Crane.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Crane Cabin for overhead crane, gantry crane, port crane

Crane cabin is usually installed under the main girder beam of an overhead crane, gantry crane or jib crane, etc. It is a crane operator room with console for crane control.

Crane cabin

Features:
1. Space capsule design with wide vision;
2. Cabin can be installed both the left side and right side of the cane;
3. Air Conditioner or cooler installed in the cabin to create comfortable environment for operator;
4. The entrance can be at the side, top of the cabin for flexible enter;
5. Quality steel and glass to guarantee safety;
6. Top load capacity static load> 2.5KN/m2.

https://www.weihuacraneglobal.com/product/Crane-Cabin.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Carbon Brush Current Collector

Carbon brush current collector for Overhead Crane can be single pole busbar collector, multi-pole busbar collector, seamless conductor rail collector, copperhead conductor rail collector, etc. Its performance, quality, material and the structural components of the material will directly affect the safe operation quality of the whole system equipment. Therefore, the current collector is one of the most important component of the entire conductor rail system. For your different requirements on current, busbar type or installation, we always offer you the right current collector and solutions.

Carbon brush current collector

The carbon brush current collector is composed of carbon brush, stainless metal part and wear resistant plastic part. Spring can make the carbon brush maintain uniform contact. There is a traction arm for each group collector. The double collector system can be used for guiding device or higher current device.



The jointless conductor rail current collector is one of the main devices for picking up electric energy from the collecting side of the conductor system, and the electric energy is directly transmitted to the electric appliance through the sliding contact between the collecting brush and the guide rail, thereby realizing mobile power supply of cranes.



The current collector consists of a mechanical structure tension device and a collector brush that directly contacts the guide rail. The tension device of the mechanical structure determines the sliding contact pressure of the collector brush and the guide rail and the stability of the mechanism. The brush is the conductor of the sliding contact of the guide rail to pick up the electric energy.













A current collector for multi-pole tube conductor

https://www.weihuacraneglobal.com/product/Carbon-Brush-Current-Collector.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Crane Motors / Overhead Crane, Gantry Crane Motors

The motors for cranes are of various famous brands from China and other countries. For your different needs, we provide different option motors brands such as Jiamusi, Jiangxi Special Motors, Siemens, ABB, SEW, etc. We suggest the right brand motors and models according to the cranes you have. Such as ZDS Motor for MD hoist and ZDY motor for electric hoists.

motors for cranes

ZDS Motor:
1. Application scope: MD Hoist
2. ZDS double speed motor cluster is a composite motor which is combined by a low speed drive device between two awl rotor three-phase asynchronous motors.
3. The high-power one is the main motor, and the low-power one is the auxiliary motor. That makes ZDS has two mode of speed: high and low.
4. ZDS is a horizontal type motor, its seat is without foot, and it utilizes cone brake.
5. It's able to start frequently.



ZDY Motor:
1. Application scope: Electric hoists
2. Conical rotor three-phase asynchronous motor.
3. Utilizing automatic brake device.
4. Applies to trolley traveling with electric hoist and crane traveling mechanism.
5. Applies to the drive device that needs small starting torque and smooth brake.
6. It's self-cooled type, and its front cover connects flange.
7. Stator: good moisture-proof performance and thermal stability, and its insulation class reaches B class.
8. Rotor: Running smoothly, small vibration.











Electric Hoist Motor









Electromagnetic Brake Solid Rotor 3-phase Asynchronous Motor





Motors for Monorail Hoist Trolleys

https://www.weihuacraneglobal.com/product/Motors.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Crane Reducers for overhead crane, gantry crane, trolley hoist

1. Application scope: Electric hoist traveling mechanism, gearbox reducers for crane.

2. Widely used in transmission equipment of mining, metallurgy, chemical industry, building material and light industry, etc.

3. The crane reducer should meet the mechanical strength needs when it's used in cranes.

4. Crane reducer mainly used in mechanism of lifting, traveling, rotating and amplitude.

5. The needs of suspension-suit-type gear reducer which is installed in traveling mechanism are small volume, light weight and compact structure; and its output end should be Internal spline which is directly installed in wheel shaft, input end should pass through a coupling and be connected with brake motor by flange; and its top should have holes for pin shaft and buffer device to fix on frame.

6. Crane motor and converter-speed-regulating motor for metallurgy are squirrel-cage rotor motor. Squirrel-cage rotor motor could meet the needs of different working conditions, such as frequent starting, braking, overload, reversing, over speed, collision and vibrating. And it also could meet the need of working under invert control, to realize soft start and four-quadrant operation.

Crane reducer

https://www.weihuacraneglobal.com/product/Reducers.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Wire Rope Reel or Drum for overhead crane and gantry crane

1. Wire Rope Reel/Drum Application: Crane accessories for reeling wire rope as a winch or electric hoist.

2. Drum units is constituted by drum, shaft, gearwheel, hub, bearing body and bearing.

3. The material of wire rope drum is usually no less than HT20-40 cast iron, ZG25,ZG35 or Q235B, Q345B welding steel plate is also able to be the material for special needs.

4. Wire rope drum units applies to the large tonnage crane machinery which needs high-performance.

Wire Rope Reel/Drum

For Safety

1. The surface of the single-layer winding drum is cut with a spiral groove with an arc-shaped section to increase the contact area between the wire rope and the drum body, and to fix the winding position of the wire rope on the drum to avoid the influence of adjacent wire ropes rubbing against each other.



2. The surface of the drum body of the multi-layer winding drum is usually a smooth surface without spiral grooves, and there are flanges at both ends of the drum body to prevent the wire rope from slipping out. The disadvantage is that the wire ropes are closely arranged, and the layers are stacked and rubbed against each other, which has a great impact on the life of the wire rope. Among the structural dimensions of the reel, the key dimension that affects the life of the wire rope is the calculated diameter of the reel.



3. In order to ensure the reliable fixation of the wire rope tail and reduce the stress on the pressure plate or wedge, when the pick-up device is lowered to the lower limit position, in addition to the fixed loop of the wire rope, 1.5 to 3 safety loops should be reserved on the reel. Known as the load-relief ring, this has been taken into account in the design of the reel. In use, the more loops of the wire rope tail are retained, the smaller the force on the pressure plate or wedge of the rope tail, and the safer it is. If the lower limit position of the pick-up device is too low and the remaining number of wire ropes on the drum is less than the designed number of safe loops, the force on the tail of the wire rope will exceed the pressing force of the pressure plate or wedge, resulting in the wire rope was pulled off and the heavy object fell.









Wire Rope Drum Packing

https://www.weihuacraneglobal.com/product/Wire-Rope-Reel.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

New Design Crane Wheels for Overhead Crane and Gantry Crane

New Design Crane Wheels for Overhead Crane and Gantry Crane 

Diameter: Φ160mm~ Φ1000mm

This wheel set is for the new generation European standard overhead crane for traveling and hoist mechanism. The wheels are made by 42CrMo, 65Mn, etc. with large wheel load and long service life.

New Design Crane Wheels for Overhead Crane and Gantry Crane

Structural Features:
1. 42CrMo, 65Mn, etc.;
2. Compact structure, large wheel load;
3. Reserved encoder interface, effective deviation correction;
4. The structure is easy to install and disassemble, with high assembly precision and stable operation;
5. Good wear resistance and impact resistance, thus improving the service life of the wheel;
6. The German SPECTRO spectrometer is used for material testing to ensure the accuracy of the material;
7. It covers Ф250-Ф900 and other specifications, and can also carry out non-standard designs according to customer needs.

Product Performance:
1. Smooth transmission and low noise;
2. Strong versatility and convenient replacement of accessories;
3. All wheelsets are made with well-known brand bearings, which are processed and assembled in strict accordance with industry standards to ensure that each product is a qualified product.

https://www.weihuacraneglobal.com/product/New-Design-Crane-Wheels.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Crane Gearbox H Series for overhead crane and gantry crane

Crane Gearbox H Series

Model: H3HH5~H4HH25
Max. Power: 10515KW
Output Torque: 6KN•m～1400KN•m
Transmission Ratio: 1.25～450
The speed of the high-speed shaft ≤1500r/min;
Working Temperature: -25℃～+40℃;
It rotates in both forward and reverses directions;

Crane Gearbox H Series

Working Conditions:
Operating hours per day: 24 hours
Working factor: 100%
Maximum temperature: 90°C (mineral oil cooling) and 100℃ (cooling with VG460 synthetic oil)

Structural Features:
1. Parallel shaft transmission;
2. Modular design to meet different needs;
3. The gear precision reaches 5-6 grades with less noise;
4. Overall structure of the box, excellent oil seal with good sealing.







Product Design:
1. From the gearbox to the internal gear, it adopts a completely modular design, which is suitable for large-scale production and flexible selection.
2. The gear adopts alloy carburizing and quenching, the tooth surface hardness is as high as 60±2HRC, and the tooth surface grinding accuracy is as high as 5-6 grades.
3. The installation method of the product is flexible and changeable, which is easy for customers to choose.

Product Performance:
1. Low noise, noise-absorbing box structure + large coincidence gear design.
2. Using computer modification technology, the gear is pre-shaped, which greatly improves the bearing capacity of the reducer.
3. Good temperature characteristics due to its high efficiency, large surface area of the box and a cooling system with good performance.

https://www.weihuacraneglobal.com/product/Crane-Gearbox-H-Series.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066