Gantry Crane for Shipyard / China Leading crane manufacturer

 Gantry crane for shipbuilding is mainly used for hull stitching in shipyard. It can carry out hoisting, transport and turning, especially for the flipping and closing of ship body. There are 2 trolleys (up trolley and down trolley) for the flipping operation, lifting and adjustment.

 

Gantry crane for shipbuilding

 

This gantry crane can be used at shipbuilding workplace and shipyard for the handling of components such as steel bar, steel plates and other steels from the trucks to the worksite. The number of cranes is decided by the worksite area and smooth working situation.

 

 

Features of Shipbuilding Gantry Crane:

1. The whole crane is composed of main beam, leg, flexible leg, lower horizontal beam, handrail and cabin.

2. The main beam cane be single beam or double beam.

3. There are 4 tracks for up trolley and down trolley on the double beam crane. The up trolley is with 2 main hooks and runs on the upper flange, while the down trolley is with 1 main hook and 1 vice hook, and runs on the lower flange. This design is for the flipping and handling of large ship section.

4. For reducing deadweight, the leg is a box type structure, while the flexible leg is a Y type structure which is composed of upper connection, 2 steel pipes and lower connection.

5. The power supply of crane adopts cable reel method, and the trolley power supply use the festoon track.

6. There are overload protection device, wind-proof track clamping device, anchor device, dogvane, and other mechanism limiters and display, etc.

 

 

 

https://www.weihuagantrycrane.com/product/Gantry-Crane-for-Shipyard-Shipbuilding.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Rubber Tire Railway Laying Crane / China Leading Crane Manufacturer

 The rubber tire railway laying crane is different from the traditional track-laying method. It is more advanced technology, which uses 2 cranes to lift the rail tracks and carry the tracks into the tunnel for railway laying. At the same time, this crane can be also used to lifting concrete tanks and with casting function.

 

rubber tire railway laying crane

 

The Tel Aviv light ballastless track project is an important project in Israel. It is the largest government-licensed infrastructure construction project in Israel with the largest investment scale, complicated construction and large technical difficulty.

 

 

The traditional railway laying method: firstly lay a temporary track for the track laying machine and the concrete pouring car, and then lay the railway track by the railway laying machine; after the construction of the concrete pouring car completed, the temporary track is removed. So the process is complicated, a lot of equipment is used, and with long construction period.

 

 

The advanced railway laying method: the rubber tire railway laying crane has the functions of laying track and pouring concrete, and it does not need temporary track, requires less construction equipment, saves labor and time.

 

 

The whole foundation of the ballastless track can replace the loose gravel bed track, which has the advantages of good smoothness, high stability, long service life and less maintenance work. The train can run at speeds of more than 350km/h, which is the world's advanced track technology.

 

 

Features of Rubber Tire Railway Laying Crane:

1. Modular design, convenient transportation and installation.

2. The gantry lifting, variable pitch, steering, and concrete tank lifting are all controlled by electro-hydraulic control, stepless speed regulation, and each action can be performed separately or in combination.

3. The concrete tank clamping mechanism is equipped with high-quality synchronous valve and safety valve, and the synchronization accuracy is over 98%.

4. Walking frequency control, all-wheel drive, high stability, strong ground adaptability.

5. One-button to control all-wheel steering and rail change, steering mechanical limit, straight travel lock and other functions, practical and efficient.

6. Pendant and remote control, interlocking functions, safe and reliable.

https://www.weihuagantrycrane.com/product/Rubber-Tire-Railway-Laying-Crane.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

 

Winch Hoist for Dam Gate / China leading crane manufacturer

Winch hoist for dam gate is employed to hoist dam floodgate and trash rack, it is mobile or can be fixed on the dam top. This hoist also can be used to lift other metal devices for dam equipment installation and inspection.

 

Winch hoist for dam gate

 

1. Fixed winch hoist can be winch type, rack type, chain type, screw type and hydraulic type.

2. Mobile winch hoist can be gantry type, semi-gantry crane, bridge type and trolley type.

 

 

Features of Winch Hoist for Dam Gate:

1. Lifting motion is fixed, only goes up and down along the gate wall, and spin the gate around the Support hinge.

2. Water flow power is considered while lifting the floodgate, especially for large span gate, need 2 lifting points and keep in sync.

3. Large lifting capacity, but low work duty, normally lifting speed is not more than 4m/min. While a few dam winch hoist speed can reach 10-14m/min.

 

 

Crane Parts Packing and inland Transport

https://www.weihuagantrycrane.com/product/Winch-Hoist-for-Dam-Gate.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Subway Laying Machine / China leading crane manuacturer

Subway laying machine is mainly employed to lay subway tracks and for tracks examination/maintenance. This machine is controlled by hydraulic control, the height and span can be adjustable. Users can 1 set this machine to handle concrete and other devices, or use 2 sets this machine to complete laying of 25m rail row synchronously.

 

Subway laying machine

 

The height range: 3,100mm ~ 3,600mm.

The span range: 3,000mm ~ 3,900mm.

Altitude: ≤ 2,000m

 

https://www.weihuagantrycrane.com/product/Subway-Laying-Machine.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

RMG Crane / China leading crane manufacturer

 RMG crane is rail mounted gantry crane traveling along the rails on the ground, which mainly composed of steel structure, long traveling mechanism, cross traveling mechanism, sling, anti-sway system, container spreaders, and electrical equipment. RMG cranes can be widely used for outdoor stuff handling and projects such as container handling, steel plate/pipe handling, subway construction slag lifting, machinery lifting, bulk material handling and other heavy stuff handling.

 

RMG crane

 

The RMG crane is equipped with frequency conversion, PLC control system and CMMS fault detection system. Standards: China GB standard, ISO standard of International Standardization Organization, European FEM, Japan JIS standard, etc.

 

 

Features of RMG Crane:

1. This RMG crane can be applied in inland terminals, container yard, railway freight station, coastal freight yard and frontier wharf, etc.

2. Dedicated container spreaders to lift 20 feet, 40 feet and 45 feet containers.

3. Electrical drive system is full digital AC frequency conversion. It has the functions of PLC control speeding, CMS intelligent monitoring and management system, running state real-time monitoring equipment.

4. The upper trolley can rotate 270° for flexible load and unload.

5. Three-in-one reducer is adopted for long travel and cross travel mechanism with easy maintenance.

6. Safety protection: Anti-breaking shaft, wind warning, anti-tipping, anti-etc.

7. Crane driven wheel has brake and the crane traveling mechanism is equipped with Electrical interlocking, which stop the crane in case of hurricane or big wind.

 

 

8. The spreader can rotate ±5°. Anti-sway system to ensure highly precision of loading, unloading and positioning.

9. Special rotating trolley can be equipped according to the requirement of customers to make the spreader rotate 200°.

10. Remote monitoring and trouble diagnosing system are available according to the requirement.

11. Safe, reliable, green and easy maintenance.

12. Adequate safety protection device, communication and lightening system.

 

 

 

 

5 RMG Cranes Working Together

 

RMG Crane for Kazakhstan  

 

RMG Crane with Weihua Logo

 

Cap. 60t RMG Crane for Shipping

 

RMG Crane Ship Loading

https://www.weihuagantrycrane.com/product/RMG-Crane.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066

Container Straddle Carrier / China leading crane manufacturer

 The most common application for straddle carriers is for container handling in port terminals and container yards. Container straddle carriers are used for stacking and moving containers. These straddle carriers have the ability to stack containers up to 4 layers. The running speed can be up to 30 km/h with full load. The workers can sit at the top so that they can see situations of front and back.

 

The normal capacity of Weihua straddle carriers is 35t, and the Max. design capacity is 60 t (59 long tons; 66 short tons) same as 2 full containers.

 

straddle carriers

 

 

https://www.weihuagantrycrane.com/product/Container-Straddle-Carrier.html

Email: weihua@craneweihua.com

WhatsApp: +86 15093392066