Boat and Yacht Handling Crane / Weihua Crane / Weihua Gantry Crane

Yacht handling cranes, also known as boat handlers. It is widely used in water sports games, yacht clubs, navigation, shipping and learning, etc. It can transport different tonnage (32 tons - 1000 tons) of boats or yachts from the shore dock for on-shore maintenance, repair or launching of new vessels.

Yacht handling cranes

The boat and yacht handling crane includes the following items: main structure, traveling wheel block, hoisting mechanism, steering mechanism, hydraulic transmission system and electric control system. The main structure is N type, which can transfer the boat/yacht with height surpass crane's height.

According to different requirements of our customers, the boat handling crane can handle different tonnage boats or yachts (10T-800T) from the shore side, it can be used for the maintenance on the shore side or can put the new boat into the water. This yacht handling crane has soft and firm belt to lift the boat and yacht so that it will never hurt the surface. This crane also can put the boat in sequence quickly with small gap between each two boat.

Features of Yacht Handling Crane:

1. For the crane traveling, this crane can move in diagonal direction, this boat and yacht handling crane also can steer in 90 degree and put the boat in any designated position according to requirements.

2. This crane can be adjusted the width of the main girder according to the boat in case to handling different side boat.

3. This yacht handling crane is of low expense, high performance, easy to operate and maintenance and so on.

4. Low cost on the daily operation, it adopts the soft and firm belt to ensure there is no harm to the boat when hoisting.

5. This boat crane can make the boat in order quickly; it also can adjust the gap between each boat according to different condition.

http://www.weihuacraneglobal.com/product/Boat-and-Yacht-Handling-Crane.html
Email: weihua@craneweihua.com

Rubber Tyred Container Gantry Crane / Weihua Crane / Weihua Gantry Crane

Rubber tire container gantry crane is employed to handle containers, boats/yacht, large component at the loading/unloading places and container yard. This rubber tyred crane is fitted with multiple hooking point's spreaders to meet the needs of different lifting situations. The whole crane can carry out 360° steering with flexible movement.

Full hydraulic drive for crane traveling mechanism and lifting mechanism with Step less speed change. The long traveling use hydraulic closed circuit with good transmission efficiency, less fault. There are safety indicator and overlord limiter to ensure safety of operators and products. All operation are controlled by CAN-BUS control.

Features of Rubber Tyred Container Gantry Crane:

1. Rubber tyred container gantry crane is usually called RTG for short, which is employed to stack containers in container storage yards. Rubber tyred container ganry crane is flexibly moved by its own rubber tires for transshipping containers.

2. Weihua rubber tyred container gantry crane is equipped with specialized spreaders to lift standard-sized 20GP, 40GP, 45HQ containers and hydraulic storage tanks.

3. The trolley and crane traveling mechanisms equip three-in-one reducer with convenient maintenance.

4.  The tires of this container gantry crane can rotate 90°and move obliquely at 20° and 45°.

Rubber tire container gantry crane

http://www.weihuacraneglobal.com/product/Rubber-Tyred-Container-Gantry-Crane--Rubber-Tyred-Gantry-Crane.html
Email: weihua@craneweihua.com

Fully Automatic Control Overhead Crane with Electromagnetic Disk

This automatic control overhead crane (Email: weihua@craneweihua.com) is equipped with Slot silicon steel storage rack, Large magnets and Fan-shaped silicon steel storage rack. It has high accuracy with accuracy ± 4mm.

http://www.weihuacraneglobal.com/product/CNC-Crane-with-High-Precision-Positioning.html

Multifunctional Crane for Electrolytic Aluminum

Multifunctional Crane for Electrolytic Aluminum (Email: weihua@craneweihua.com) with feeding mechanism, slagging mechanism, the anode replace mechanism,s shelling mechanism and aluminium discharging mechanism.

http://www.weihuacraneglobal.com/product/Multifunction-Crane-for-Electrolytic-Aluminum.html

L Type Single Girder Gantry Crane / Weihua Crane / Gantry Crane

L type single girder gantry crane with hook is applied for handling and convey operation outdoors, or at warehouse, stock ground, railway station, sea port cargo area, etc. This single girder gantry crane can be also used to do some special operations with a variety of special spreaders.

Power supply can be two forms: cable car and cable reel, customers can choose one of them. And the specifications, installation location of the cable reel can be based on the specific situation.

This single girder gantry cane is equipped with closed cab, and there is cabs with heat preservation for selection. The L type gantry crane has the features of easy installation, big clearance, good operation vison, integrated console control and reasonable whole institutional arrangement.

Features of L type Single Girder Gantry Crane:

1. Box type girder, L type legs with weld structure, Increasing he work space, and convenient for installation and maintenance;

2. Trolley power supply adopts profiled rails, safety slide line and the cable conductive device system;

3. Components standardization, seriation and generalization;

4. Crane power supply can be from cable reel (left and right) and sliding line( left and right);

5. Good operation vision of cab, equipped the internal linkage control console, flexible and comfortable operation, install of fan, heater, cooler, air-conditions and intercom  according to the customers' requirements;

6. Customized according to the users' needs of working environment, types of power source and the other technical requirements. Also design and manufacture span according to users' requirements.

http://www.weihuacraneglobal.com/product/L-Type-Single-Girder-Gantry-Crane.html
Email: weihua@craneweihua.com

Gantry Crane for Steel Structure Bridge Production

Weihua made 3 sets of double girder gantry cranes for Shanxi Xiaohe Construction Industry Co., Ltd. Which is the largest steel structure bridge production base in Shanxi Province. Capacity: 32t/5t two sets, and 80t/20t one set.

Gantry Crane for Steel Structure Bridge Production

Shanxi Xiaohe Construction Industry Co., Ltd. is a state-owned holding company and is mainly responsible for the construction and future production operation of the Shanxi Construction Industry Modernization Xiaohe Park (Phase 1) project. The company specializes in the production, processing and construction of steel structure parts such as prefabricated multi-rise steel structure houses, high-rise (super high-rise) steel structure buildings, large-span space structures, American / European standard steel structures, bridge steel structures, modular buildings , Focus on civil construction, public construction, industrial construction, municipal engineering, overseas engineering and other fields.

The gantry cranes provided by Weihua is mainly used for the handling of steel structure workpieces. Weihua gantry crane has a lightweight and modular design that complies with European FEM/DIN standards. At present, the gantry cranes have been successfully installed and commissioned, which has won recognition and praise from customers.

Email: weihua@craneweihua.com
http://www.weihuacraneglobal.com/case/Gantry-Crane-for-Steel-Structure-Bridge-Production.html

320t Ladle Crane 2017 New Crane

This is a new overhead crane (Email: weihua@craneweihua.com) made by Weihua in 2016-2017. This crane is for lifting ladle in metallurgy plant. The first part of this video shows the 3D animation and the second part shows the production and installation of this 320t ladle crane.

http://www.weihuacraneglobal.com/product/320t-Overhead-Crane-Foundry.html

Rubber Tyred Gantry Crane with Electromagnetic Beam for Steel Pipe Handling

This is a 3D animation video (Email: weihua@craneweihua.com) shows the rubber tyred gantry crane (RTG) with electromagnetic hanging beam for steel pipe handling. The tyres can carry out in-place rotation, 45 degree rotation, 90 degree rotation, etc.

http://www.weihuacraneglobal.com/product/Rubber-Tire-Gantry-Crane-for-Steel-Pipe-Handling.html

Email: weihua@craneweihua.com

Container Rail Mounted Gantry Crane / Container Crane / RMG / Weihua Crane

Features of Weihua Rail Mounted Gantry Crane for Container Handling:

1. U-type frame, double cantilever with rod, strong, light weight.

2. Large gantry span and width, continent container loading and unloading

3. 360° rotating spreader with excellent adaptability and efficiency.

4. Long Traveling Mechanism Assembly

5. Frame/Gantry Assembly

6. Trolley Assembly

7. Electrical Control System

8. All digital frequency conversion and PCL control technology

9. High Precision Sensor Data Acquisition Technology

10. Industrial computer data analysis and processing system

Rail Mounted Gantry Crane

Rail-type container gantry crane is mainly consists of the steel structure, lifting mechanism, micro-transfer mechanism, spreader anti-sway system, crane travelling mechanism, container spreaders, electrical equipment, and other necessary auxiliary equipments.

The container rail mounted gantry crane adopts frequency conversion, PLC control system and CMMS fault detection system. Main standard reference: GB/T19683-2005, JT/T566-2004, and ISO standard of International Standardization Organization, European FEM, Japan JIS standard.

Features of Container Rail-Mounted Gantry Crane:

1. This crane can be used in inland terminals, container yard, rail freight station, coastal freight yard and frontier wharf.

2. Adopt dedicated container spreaders which can handle 20 feet, 40 feet and 45 feet containers.

3. Electrical drive system is full digital AC frequency conversion, PLC control speeding, CMS intelligent monitoring and management system, the running state real-time monitoring equipment.

4. The upper trolley can rotate 270 degree for easy load and unload.

5. Three-in-one reducer is adopted for long travel and cross travel, easy maintenance.

6. Safety protection: Anti-breaking shaft, wind warning, anti-tipping, etc.

Depending on the constitution of main girder, outriggers and anti-sway device, container rail mounted gantry crane can be divided into different types.

1. Double cantilever gantry crane has big room between its outriggers for containers to pass through. Usually opening widely at upper parts to form a shape of U and combining with the girder forming a shape of N.

2. Non-cantilever crane has a simple structure because of containers do not need to pass through the room between its outriggers.

Compared with ship-to-shore gantry crane, the trolley of Rail Mounted Gantry Crane travels at a lower speed and usually equipped without anti-sway stabilizer, while it will be equipped with anti-sway device if users need it for reducing operation stress and improving production efficiency. For rope type lifting mechanism, increasing the rope damp is a usual way to accomplish stabilization. And for rigid type lifting mechanism, its own rigid components are available to accomplish stabilization.

http://www.weihuacraneglobal.com/product/Container-Rail-Mounted-Gantry-Crane--Rail-Mounted-Gantry-Crane.html
Email: weihua@craneweihua.com

Weihua Crane Assist Launching of Carrier Rocket Long March 5B

On May 5, the Long March 5B carrier rocket developed for China's manned space station project made its first successful flight in Wenchang, Hainan. In this launch mission, Weihua crane provided the rocket with high-precision hoisting and transshipment protection with advanced technology.

In Hainan Wenchang Satellite Launch Base, Weihua Group's over cranes undertaken the key link of rocket transfer and hoisting, and completed the handling, turning, and testing of rockets in the plant with high precision. Although the cranes are big and sturdy, their lifting accuracy reaches an astonishing 2 mm. The secret is that they have a sensitive Brain that can pass through the needle thread-equipped with anti-sway technology independently developed by Weihua, which can reduce the amplitude of swing by 95% and improve the stability and accuracy of the rocket during lifting.

Weihua lifting equipment has been serving aerospace engineering for a long time. It is the contractor of lifting equipment for 4 China satellite launch bases in Jiuquan, Taiyuan, Xichang, and Wenchang, helping the detector, the Long March rockets, the Mozi, and the Shijian 13 satellite successfully flew to the sky. In the journey accompanying the development of China's aerospace industry, Weihua Crane has accomplished all tasks excellently with the advanced lifting technology, excellent quality assurance, responsible professional attitude and perfect after-sales service, and has been unanimously agreed Praise and have won major contribution awards many times.

http://www.weihuacraneglobal.com/news/Weihua-Crane-Assist-Launching-of-Carrier-Rocket-Long-March-5B.html
Email: weihua@craneweihua.com

Double Girder Overhead Crane with Grab / Weihua Crane

Double girder overhead crane with grab consists of girders, crane traveling mechanism, trolley, electric system and grab. Double girder overhead crane with grab is widely used in power stations, warehouses, workshops and ports to grab or lift bulk materials. The lifting capacity includes the weight of grab and the grab opening direction is parallel or vertical to the main girders.

Double girder overhead crane with grab

Mechanisms of Double Girder Overhead Crane With Grab: 

1. Double girders, box-type shaped by wielding, and the camber degree meets China standard;

2. Adopt high quality carbon steel Q235B and Q345B;

3. Efficient brake, long service life;

Electric System:

1. Safety slide contact line or angle slide contact line;

2. Trolley power supply through flat cable;

3. Traveling smoothly and beautiful exterior;

Protection Devices:

1. Rain covers for lifting mechanism, motor box and drive system outdoors;

2. Anti-collision device, sound and light alarm device;

Control System:

1. Handle control;

2. Cab control can be customized according users' needs with intermediate working level;

3. The cab can be open or close style installed left or right;

4. Entrance of cab: side entrance, end entrance and top entrance.

http://www.weihuacraneglobal.com/product/Double-Girder-Overhead-Crane-with-Grab--Overhead-Crane-with-Grab.html
Email: weihua@craneweihua.com

FEM/DIN Double Girder Overhead Crane / Weihua Crane

FEM/DIN standard double girder overhead crane is designed and manufactured with European standard. The lifting capacity of this FEM/DIN double standard overhead crane can be up to 800t. The trolley is installed between two main girders. Thus it increases the traveling scope of spreader. This crane is with reliable performance, flexible application range, easy to operate and convenient to maintain.

FEM/DIN standard double girder overhead crane

Lightweight and Modular Design:

1. Overall height is 20%~25% lower than traditional cranes;

2. Self-weight is lighter by 20%~30%;

3. Max wheel load reduces 15%~20%;

4. Smaller limiting size increases working scope;

5. Light structure reduces the cost of workshops;

6. Every component designed to be a standard series and interchangeable;

7. Modularization design is easy for transporting;

8. Standard modular design makes good quality and fast delivery.

Advanced Manufacturing Technology:

1. Sandblast pretreatment on steel plates and the surface quality reaches Sa2.5;

2. CNC cutting machine cuts webs plate to insure the curved surface is smooth and accurate;

3. Seams are soldered by automatic arc welding and detected by ultrasonic and X-ray ;

4. The structure of girder and trolley is manufactured by floor-type boring lathe to insure flatness.

Safety:

1. Safety supervision system is with an overload limiter and shows the load value on screen to warn operator to avoid overload;

2. Before start up, the whole system will carry out self-checking includes: power supply voltage, default phase, validity of the safe protection device and the zero button;

High Reliability:

1. Use imported motor with insulation grade of F and protection degree of IP54. With overheat alarm. The motor is shielded by aluminum alloy stretching cover with good heat dissipation performance;

2. Imported reducer from Germany. hardened gears with good bearing capacity, excellent seal without penetration of grease;

3. Main electric components imported from international brands such as: Siemens, Schneider and ABB etc. with protection degree not lower than IP54;

4. Wheels are forged by 65mn alloy steel with features of wear-proof, anti-fatigue and long service life.

5. Low energy consumption and maintenance free;

6. Whole crane energy saving about 30%;

7. All-in-one transmission mechanism making it work more efficient;

8. Variable frequency control whose high and low rotating speed ratio is 1:10 and work efficiency increases more than 20%;

9. Less and easy maintenance reduces the cost of maintenance;

10. Manufactured by advanced technology and constituted by high quality imported components greatly reducing malfunction and cost;

Intelligent:

1.  Electric anti-sway tech realize accurate positioning;

2. Advanced electric control tech turn it into a crane robot with semi-automatic control and full-automatic control;

http://www.weihuacraneglobal.com/product/FEMDIN-Double-Girder-Overhead-Crane.html
Email: weihua@craneweihua.com